Downloads (1)

Technical Data Sheet (TDS)226 KB

Specification

Weight and Dimensions
Width300mm
Thickness0.4mm
Consolidated Thickness0.4mm
Areal Weight400g/m²
Fabric Specification
Fibre SpecificsKevlar 49
Weaveknitted
Product Data
ColourBlack
FormatWoven Fabric
Fibre TypeAramid / Kevlar Fibre
UV ResistancePoor
BrandDupont
Compatible With
Compatible WithEpoxyYes
Compatible WithPolyesterYes
Compatible WithVinylesterYes
General Properties
Gross Weight0.036kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

400g Coated Kevlar Protective Patch Material

Made from black high solids rubber reinforced with genuine Dupont® Kevlar® fibre, this rubber-like protective patch material can be used to add durable rip-stop protection to a range of garments (such as ski-pants), luggage or equipment.

This thin, flexible 375gsm material is fully waterproof and cut be stitched or bonded into place.

This fabric is 1.5m (1500mm) wide and is sold by the linear metre or in smaller pre-packaged rolls.


PRODUCT VERSIONS

Size

AVAILABILITY:3 in stock available for immediate shipping


PRICE
€15.85ex. VAT
(€176.11 /SQM)
3 in stock available for immediate shipping
QTY
PACKS
PACKS
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

This is the sturdiest of all our Kevlar® aramid textiles and is actually a combination of Kevlar and a high solids rubber-like black coating.

This heavyweight coating is strong, impervious to dirt and water and easily cleaned making this coated Kevlar® fabric ideal on its own as a protective sew on kevlar patch with the advantage of Kevlar® reinforcement or, in conjunction with another Kevlar® textile such as our Kevlar® felt, as a very strong Kevlar reinforcement patch or even blanket.

Typical Uses:

  • Protective patches for ski-pants, walking trousers, jackets etc.
  • Bags, satchels, holdalls and cases.
  • Soft or semi rigid motorcycle luggage (panniers).
  • Use together with our Kevlar felt for ultimate protection and a sturdy, cleanable, waterproof outer layer.

How to Buy

The Kevlar® fabric shown on this page weighs 400g/sqm. We can supply the fabric in smaller cut pieces (30cm x 30cm or 30cm x 150cm) which are perfect for making small patches or adding protection to smaller garments such as gloves. For larger projects we can also supply the fabric directly off the 150cm wide roll by the linear metre. Orders for multiple metres will be shipped in one continuous roll, not multiple individual square metres.

When buying fabric by the metre the width of the roll is 150cm (1.5m / 59").

Further Information

Cutting Kevlar®

Kevlar® is VERY difficult to cut using normal scissors and this Kevlar felt is one of the hardest of all our fabrics to cut in this way.

To cut this fabric we would strongly suggest a good pair of Kevlar Shears which will make light work of the task and leave a tidy edge on the fabric.

DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

This is the sturdiest of all our Kevlar® aramid textiles and is actually a combination of Kevlar and a high solids rubber-like black coating.

This heavyweight coating is strong, impervious to dirt and water and easily cleaned making this coated Kevlar® fabric ideal on its own as a protective sew on kevlar patch with the advantage of Kevlar® reinforcement or, in conjunction with another Kevlar® textile such as our Kevlar® felt, as a very strong Kevlar reinforcement patch or even blanket.

Typical Uses:

  • Protective patches for ski-pants, walking trousers, jackets etc.
  • Bags, satchels, holdalls and cases.
  • Soft or semi rigid motorcycle luggage (panniers).
  • Use together with our Kevlar felt for ultimate protection and a sturdy, cleanable, waterproof outer layer.

How to Buy

The Kevlar® fabric shown on this page weighs 400g/sqm. We can supply the fabric in smaller cut pieces (30cm x 30cm or 30cm x 150cm) which are perfect for making small patches or adding protection to smaller garments such as gloves. For larger projects we can also supply the fabric directly off the 150cm wide roll by the linear metre. Orders for multiple metres will be shipped in one continuous roll, not multiple individual square metres.

When buying fabric by the metre the width of the roll is 150cm (1.5m / 59").

Further Information

Cutting Kevlar®

Kevlar® is VERY difficult to cut using normal scissors and this Kevlar felt is one of the hardest of all our fabrics to cut in this way.

To cut this fabric we would strongly suggest a good pair of Kevlar Shears which will make light work of the task and leave a tidy edge on the fabric.

DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

Downloads (1)

Technical Data Sheet (TDS)226 KB

Specification

Weight and Dimensions
Width300mm
Thickness0.4mm
Consolidated Thickness0.4mm
Areal Weight400g/m²
Fabric Specification
Fibre SpecificsKevlar 49
Weaveknitted
Product Data
ColourBlack
FormatWoven Fabric
Fibre TypeAramid / Kevlar Fibre
UV ResistancePoor
BrandDupont
Compatible With
Compatible WithEpoxyYes
Compatible WithPolyesterYes
Compatible WithVinylesterYes
General Properties
Gross Weight0.036kg
Can’t find the answer you’re looking for?Ask our technical team a question.

Yes, the fabric can be glued in place using fabric adhesives. However, for a stronger repair, we recommend the use of a Kevlar Sewing Thread which can be used by hand or in a sewing machine to stitch the material permanently to the garment..

Yes, a good quality domestic sewing machine should be able to sew this fabric without any problems.

Although I wouldn’t recommend washing and drying them as part of their daily lifecycle, any of our Kevlar Protective Textiles (with the exception of the Kevlar Protective Patch Material) would be OK to wash and dry. The Heavyweight Fleece and Loopbacked fabrics particularly would behave pretty-much like conventional fabrics. The felt I would be a little more concerned about because it doesn’t have the knitted construction to ensure it stays in shape/together.

An example of acceptable use would be lining motorcycle jeans in the loopbacked fabric and then washing that lining occasionally; I wouldn’t expect any problems or abnormal deterioration. However, an industrial application where they went constantly from wash to dry (like a Kevlar laundry bag) would be likely to deteriorate the material more quickly.

This material is not really designed to be used externally so generally the characteristic yellow colour of Kevlar should not be a problem because it would not be seen however in certain circumstances (vent areas etc.) where it would be seen your only option would be strong textile dies however, being a synthetic fibre it's difficult to get the dye to properly penetrate the fibre and so results when dying this fabric might be hit-and-miss.

Kevlar protective textiles can be machine washed using regular domestic or commercial detergents, ideally at 50-60°C. Normal detergents have a negligible effect on the strength of the product.

You must NOT use chlorine based bleaches as they will significantly damage the strength of the fabric.

We do NOT recommend washing the 'Kevlar Protective Patch' material.

The rubber coating has excellent UV stability and as such will protect the underlying Kevlar material from UV exposure.

Which is the correct side rather depends on how and where you're using this material but generally speaking, the fully sealed 'rubber' side would tend to be the visible or external face when the material is used. A common example would be adding 'rip-stop' patches to the bottom of ski pants; in this situation, adhesive would be applied to the non-rubber side and they would be bonded to the pants, meaning that the smooth rubber side faced out.

The CSM (Hypalon) rubber coating is naturally fire resistant and self-extinguishing. However, the Kevlar Protective Patch Material as a whole has not been formally assessed against any set fire resistance standards; therefore caution should be used in cases where fire safety regulations concerning fire resistance of materials may be in force.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for 400g Coated Kevlar Protective Patch Material

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payment processing by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo Ideal logo Carte Bancaire logo Giropay logo Bancontact logo PayPal logo Bank transfer logo

Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2022. All rights reserved.