Specification

Weight and Dimensions
Wall Thickness0.4mm
Length1000mm
Outside Diameter (OD)1.5mm
Inside Diameter (ID)0.7mm
Product Data
ColourBlack
ConstructionPultrusion
AppearanceUD (Matt)
Resin MatrixEpoxy
Fabric Specification
Fibre OrientationUnidirectional
Mechanical Properties
Tensile Strength (Lengthways)400 - 500MPa
Tensile Modulus (lengthways)28-40GPa
ID Tolerance (mm)0.1mm
OD Tolerance (mm)0.1mm
Tg Onset (DMA)80°C
General Properties
Gross Weight0.0017kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

1.5mm (0.7mm) Microtube Carbon Fibre Tube 1000mm

Small scale pultruded carbon fibre tube measuring just 1.5mm OD and 0.7mm ID. This precision made carbon fibre tube is suited to ultra-lightweight applications in radio controlled models, electronics and precision engineering. The tube is manufactured to tight tolerances using high strength carbon fibre and an epoxy resin matrix for maximum performance.

Sold in 1m lengths.


AVAILABILITY:75 in stock available for immediate shipping


PRICE
€4.15ex. VAT
(€4.15 /M)
75 in stock available for immediate shipping
QTY
LENGTHS
LENGTHS

Trade discounts

0-45+
€4.15€3.90
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Pultruded carbon fibre micro tube manufactured from 100% unidirectional carbon fibre.

The tube has an outer diameter (OD) of 1.5mm and a wall thickness of just 0.4mm leaving an inner diameter (ID) of 0.7mm.

The tube is 1m (1000mm / 39") long.

Our new range of micro pultrusions include the smallest diameter commercially pultruded tube available anywhere in the world.

Designed for indoor flyers, nanorobotics, scientific and educational use, and a range of other small scale engineering challenges, these ultra-small carbon fibre pultrusions represent the pinnacle in pultrusion technology.

Further Information

How to Cut and Shape

These ultra small carbon fibre tubes are quite delicate and are best cut by folding a piece of medium grit (around 400) wet-and-dry paper over on itself and carefully using the folded edge of the paper as a very fine file.

Trade discounts

0-45+
€4.15€3.90
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

PRODUCT VIDEOS(1)

Pultruded carbon fibre micro tube manufactured from 100% unidirectional carbon fibre.

The tube has an outer diameter (OD) of 1.5mm and a wall thickness of just 0.4mm leaving an inner diameter (ID) of 0.7mm.

The tube is 1m (1000mm / 39") long.

Our new range of micro pultrusions include the smallest diameter commercially pultruded tube available anywhere in the world.

Designed for indoor flyers, nanorobotics, scientific and educational use, and a range of other small scale engineering challenges, these ultra-small carbon fibre pultrusions represent the pinnacle in pultrusion technology.

Further Information

How to Cut and Shape

These ultra small carbon fibre tubes are quite delicate and are best cut by folding a piece of medium grit (around 400) wet-and-dry paper over on itself and carefully using the folded edge of the paper as a very fine file.

Specification

Weight and Dimensions
Wall Thickness0.4mm
Length1000mm
Outside Diameter (OD)1.5mm
Inside Diameter (ID)0.7mm
Product Data
ColourBlack
ConstructionPultrusion
AppearanceUD (Matt)
Resin MatrixEpoxy
Fabric Specification
Fibre OrientationUnidirectional
Mechanical Properties
Tensile Strength (Lengthways)400 - 500MPa
Tensile Modulus (lengthways)28-40GPa
ID Tolerance (mm)0.1mm
OD Tolerance (mm)0.1mm
Tg Onset (DMA)80°C
General Properties
Gross Weight0.0017kg
Can’t find the answer you’re looking for?Ask our technical team a question.

Generally, the pultrusions are used ‘as-is’ and don’t require painting. If you really do need/want to paint the pultrusions then a light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.

No these pultrusions are not magnetic.

No, this pultrusion is manufactured from standard modulus fibres.

We do not currently offer a custom cutting service for our tubes and pultrusions. However, they are able to be cut DIY relatively easily as you can see from our tutorial video: How to Cut Carbon Fibre Sheet, Tube and Parts

Unfortunately it is not possible to cut a usable thread into carbon fibre composites. The nature of the material is such that the teeth on a thread would not be able to take any load and would break up either during thread turning or the first attempt at using the thread.

Where it is desirable to have a threaded method of attaching the tube or rod, it is commonplace to fabricate and then bond an aluminium insert into the tube or over the rod end which can then have a thread cut into it.

In simple terms these carbon rods would work with linear bearings in that fashion. The only concern is long term durability as the carbon surface is not quite as hard as aluminium and thus would likely wear quicker in many circumstances. For low usage or low load situations this may well not be a limiting factor.

The HDT of these pultrusions is 80 °C.

Yes absolutely! If done carefully, a hacksaw can be used to cut a pultrusion. Take a look at this VIDEO where we show various methods of cutting carbon fibre.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for 1.5mm (0.7mm) Microtube Carbon Fibre Tube 1000mm

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payment processing by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo Ideal logo Carte Bancaire logo Giropay logo Bancontact logo PayPal logo Bank transfer logo

Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.