Need any help or advice?+44 (0)1782 454499
Technical DataSheet (TDS) | 138 KB |
Length | 1000 | mm |
---|---|---|
Thickness | 0.5 | mm |
Width | 10 | mm |
Weight per metre | 2.5 | g |
Colour | Black | |
---|---|---|
Construction | Pultrusion | |
Appearance | UD (Matt) | |
Resin Matrix | Vinylester |
Fibre Orientation | Unidirectional |
---|
Tensile Strength (Lengthways) | 400 - 500 | MPa |
---|---|---|
Tensile Modulus (lengthways) | 28-40 | GPa |
Tg Onset (DMA) | 80 | °C |
Gross Weight | 0.0079 | kg |
---|
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Pultruded, rectangular section carbon fibre strip measuring 10mm x 0.5mm suitable for a range of uses including radio controlled models, UAVs, robotics and even musical instruments, as well as creative uses in art and fashion. The strip is manufactured to tight tolerances using high strength carbon fibre for maximum performance.
Available in 1m and 2m lengths.
AVAILABILITY:More than 100 availablefor immediate shipping
Trade discounts
0-4 | 5-19 | 20+ |
---|---|---|
€3.95 | €3.50 | €3.00 |
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Due to its incredible strength and light weight, carbon fibre strip (flat bar) is used in a wide range of applications including small and medium scale radio controlled planes, helicopters, boats and cars, UAVs, robotics and engineering.
Our carbon fibre strip is manufactured to engineering tolerances from pultruded unidirectional carbon fibres which means that all the strength of the strips runs laterally along their length.
Typical Uses
Pultruded carbon fibre strips are suitable for use in:
How to Buy
Our 10mm carbon fibre strips are available in a 1m or 2m length. Please choose the length you require from the drop-down list.
The carbon fibre strip on this page is 10mm wide and 0.5mm thick and is sold in 1m (1000mm) lengths. At Easy Composites we carry carbon fibre strips in thicknesses from 0.5mm to 2mm and widths of 3mm up to 12mm.
Discounts are available for larger quantities and wholesale/trade purchases; please contact us for details.
Trade discounts
0-4 | 5-19 | 20+ |
---|---|---|
€3.95 | €3.50 | €3.00 |
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Due to its incredible strength and light weight, carbon fibre strip (flat bar) is used in a wide range of applications including small and medium scale radio controlled planes, helicopters, boats and cars, UAVs, robotics and engineering.
Our carbon fibre strip is manufactured to engineering tolerances from pultruded unidirectional carbon fibres which means that all the strength of the strips runs laterally along their length.
Typical Uses
Pultruded carbon fibre strips are suitable for use in:
How to Buy
Our 10mm carbon fibre strips are available in a 1m or 2m length. Please choose the length you require from the drop-down list.
The carbon fibre strip on this page is 10mm wide and 0.5mm thick and is sold in 1m (1000mm) lengths. At Easy Composites we carry carbon fibre strips in thicknesses from 0.5mm to 2mm and widths of 3mm up to 12mm.
Discounts are available for larger quantities and wholesale/trade purchases; please contact us for details.
Technical DataSheet (TDS) | 138 KB |
Length | 1000 | mm |
---|---|---|
Thickness | 0.5 | mm |
Width | 10 | mm |
Weight per metre | 2.5 | g |
Colour | Black | |
---|---|---|
Construction | Pultrusion | |
Appearance | UD (Matt) | |
Resin Matrix | Vinylester |
Fibre Orientation | Unidirectional |
---|
Tensile Strength (Lengthways) | 400 - 500 | MPa |
---|---|---|
Tensile Modulus (lengthways) | 28-40 | GPa |
Tg Onset (DMA) | 80 | °C |
Gross Weight | 0.0079 | kg |
---|
Many people prefer the natural finish of these carbon products, however if you wish to paint them for your specific application then you can do so. A light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.
Generally, the pultrusions are used ‘as-is’ and don’t require painting. If you really do need/want to paint the pultrusions then a light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.
No these pultrusions are not magnetic.
No, this pultrusion is manufactured from standard modulus fibres.
We do not currently offer a custom cutting service for our tubes and pultrusions. However, they are able to be cut DIY relatively easily as you can see from our tutorial video: How to Cut Carbon Fibre Sheet, Tube and Parts
Unfortunately it is not possible to cut a usable thread into carbon fibre composites. The nature of the material is such that the teeth on a thread would not be able to take any load and would break up either during thread turning or the first attempt at using the thread.
Where it is desirable to have a threaded method of attaching the tube or rod, it is commonplace to fabricate and then bond an aluminium insert into the tube or over the rod end which can then have a thread cut into it.
In simple terms these carbon rods would work with linear bearings in that fashion. The only concern is long term durability as the carbon surface is not quite as hard as aluminium and thus would likely wear quicker in many circumstances. For low usage or low load situations this may well not be a limiting factor.
The HDT of these pultrusions is 80 °C.
Yes absolutely! If done carefully, a hacksaw can be used to cut a pultrusion. Take a look at this VIDEO where we show various methods of cutting carbon fibre.
From the description you've provided, yes, I think a carbon fibre strip like this would be well suited to your application. The thickness of the strip would be the main factor in determining how tight a radius you could bend it round. In the case of a 0.5mm thick strip you wouldn't have any problem bending this round a 15cm radius (although of course it would try to flex back, like a fishing rod).
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.