Downloads (1)

Technical DataSheet (TDS)179 KB

Specification

Weight and Dimensions
Length1000mm
Wall Thickness0.5mm
Outside Diameter (OD)2mm
Inside Diameter (ID)1mm
Product Data
ColourBlack
ConstructionPultrusion
AppearanceUD (Matt)
Resin MatrixVinylester
Fabric Specification
Fibre OrientationUnidirectional
Mechanical Properties
Tensile Strength (Lengthways)400 - 500MPa
Tensile Modulus (lengthways)28-40GPa
Tg Onset (DMA)80°C
OD Tolerance (mm)0.1mm
ID Tolerance (mm)0.1mm
General Properties
Gross Weight0.0036kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

2mm (1mm) Pultruded Carbon Fibre Tube 

Small scale pultruded carbon fibre tube measuring just 2mm OD and 1mm ID. This precision made carbon fibre tube is suited to ultra-lightweight applications in radio controlled models, electronics and precision engineering. The tube is manufactured to tight tolerances using high strength carbon fibre and an epoxy resin matrix for maximum performance.

Sold in 1m and 2m lengths.


PRODUCT VERSIONS

Length

AVAILABILITY:More than 100 availablefor immediate shipping


PRICE
€2.80ex. VAT
(€2.80 /M)
More than 100 availablefor immediate shipping
QTY
LENGTHS
LENGTHS

Trade discounts

0-45-1920+
€2.80€2.25€1.85
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Pultruded carbon fibre round tube manufactured from 100% unidirectional carbon fibre.

The tube has an outer diameter (OD) of 2mm and a wall thickness of 0.5mm leaving an inner diameter (ID) of 1mm.

Typical Uses

This ultra-light 0.5mm thick, tiny 2mm OD tube is ideally suited for use in radio controlled (RC) aircraft, helicopters, U.A.V's and other models but would be equally suited to other precision applications like robotics and automation.

Pultrusion Explained

Pultruded tubes are the most commonly used type of carbon fibre tube. Pultrusion is a method of manufacturing continuous lengths of fibre reinforced section (in this case tube) by pulling continuous strands of carbon fibre through resin and a former before curing the resin all in one process.

Pultruded tubes feature 100% longitudinal fibre orientation which gives them excellent strength along their length but does make them vulnerable to crushing forces. For applications where none-uniform forces are likely to be encountered, including crushing forces, roll wrapped carbon fibre tubes should be considered as an alternative.

The pultrusion process allows incredible tiny diameter tubes to be produced (as small as 2mm OD).

How to Buy

Our pultruded tubes are available in a 1m or 2m length. Select the length you want from the drop down at the top of the page.

Discounts are available for larger quantities and wholesale/trade purchases; please contact us for details.

Further Information

How to Cut and Shape

This carbon fibre tube can easily be cut and finished using simple workshop tools like a hacksaw and some wet-and-dry paper. Cutting and finishing a carbon fibre tube can also be perfectly safe if you follow some basic safety precautions.

For a comprehensive guide to both safety advice and cutting and finishing techniques watch our video guide to cutting and shaping carbon fibre sheet and carbon fibre parts.

Trade discounts

0-45-1920+
€2.80€2.25€1.85
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

PRODUCT VIDEOS(2)

Pultruded carbon fibre round tube manufactured from 100% unidirectional carbon fibre.

The tube has an outer diameter (OD) of 2mm and a wall thickness of 0.5mm leaving an inner diameter (ID) of 1mm.

Typical Uses

This ultra-light 0.5mm thick, tiny 2mm OD tube is ideally suited for use in radio controlled (RC) aircraft, helicopters, U.A.V's and other models but would be equally suited to other precision applications like robotics and automation.

Pultrusion Explained

Pultruded tubes are the most commonly used type of carbon fibre tube. Pultrusion is a method of manufacturing continuous lengths of fibre reinforced section (in this case tube) by pulling continuous strands of carbon fibre through resin and a former before curing the resin all in one process.

Pultruded tubes feature 100% longitudinal fibre orientation which gives them excellent strength along their length but does make them vulnerable to crushing forces. For applications where none-uniform forces are likely to be encountered, including crushing forces, roll wrapped carbon fibre tubes should be considered as an alternative.

The pultrusion process allows incredible tiny diameter tubes to be produced (as small as 2mm OD).

How to Buy

Our pultruded tubes are available in a 1m or 2m length. Select the length you want from the drop down at the top of the page.

Discounts are available for larger quantities and wholesale/trade purchases; please contact us for details.

Further Information

How to Cut and Shape

This carbon fibre tube can easily be cut and finished using simple workshop tools like a hacksaw and some wet-and-dry paper. Cutting and finishing a carbon fibre tube can also be perfectly safe if you follow some basic safety precautions.

For a comprehensive guide to both safety advice and cutting and finishing techniques watch our video guide to cutting and shaping carbon fibre sheet and carbon fibre parts.

Downloads (1)

Technical DataSheet (TDS)179 KB

Specification

Weight and Dimensions
Length1000mm
Wall Thickness0.5mm
Outside Diameter (OD)2mm
Inside Diameter (ID)1mm
Product Data
ColourBlack
ConstructionPultrusion
AppearanceUD (Matt)
Resin MatrixVinylester
Fabric Specification
Fibre OrientationUnidirectional
Mechanical Properties
Tensile Strength (Lengthways)400 - 500MPa
Tensile Modulus (lengthways)28-40GPa
Tg Onset (DMA)80°C
OD Tolerance (mm)0.1mm
ID Tolerance (mm)0.1mm
General Properties
Gross Weight0.0036kg
Can’t find the answer you’re looking for?Ask our technical team a question.

Many people prefer the natural finish of these carbon products, however if you wish to paint them for your specific application then you can do so. A light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.

Generally, the pultrusions are used ‘as-is’ and don’t require painting. If you really do need/want to paint the pultrusions then a light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.

No these pultrusions are not magnetic.

No, this pultrusion is manufactured from standard modulus fibres.

We do not currently offer a custom cutting service for our tubes and pultrusions. However, they are able to be cut DIY relatively easily as you can see from our tutorial video: How to Cut Carbon Fibre Sheet, Tube and Parts

Unfortunately it is not possible to cut a usable thread into carbon fibre composites. The nature of the material is such that the teeth on a thread would not be able to take any load and would break up either during thread turning or the first attempt at using the thread.

Where it is desirable to have a threaded method of attaching the tube or rod, it is commonplace to fabricate and then bond an aluminium insert into the tube or over the rod end which can then have a thread cut into it.

In simple terms these carbon rods would work with linear bearings in that fashion. The only concern is long term durability as the carbon surface is not quite as hard as aluminium and thus would likely wear quicker in many circumstances. For low usage or low load situations this may well not be a limiting factor.

The HDT of these pultrusions is 80 °C.

Yes absolutely! If done carefully, a hacksaw can be used to cut a pultrusion. Take a look at this VIDEO where we show various methods of cutting carbon fibre.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for 2mm (1mm) Pultruded Carbon Fibre Tube 

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payment processing by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo Ideal logo Carte Bancaire logo Giropay logo Bancontact logo PayPal logo Bank transfer logo

Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.