Specification

Weight and Dimensions
Length300mm
Thickness0.2mm
Product Data
ColourBlack
TypeSingle Sided
ConstructionVinyl Film
Appearance2x2 Twill (Matt)
Fabric Specification
Fibre Orientation0, 90
Mechanical Properties
Tg Onset (DMA)65°C
General Properties
Gross Weight0.5248kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

DI-NOC Black Carbon Fibre Vinyl (1200mm)

Genuine 3M Di-NOC (CA-421) carbon fibre effect black vinyl. This convincing looking vinyl-wrap film from 3M can be gently heated and stretched to to smoothly cover contoured surfaces like vehicle panels, motorcycle tanks, wing-mirrors, mobile devices and laptops. The film sheet is self-adhesive and easily applied to most surfaces.

Black Di-NOC is available to buy in 300mm or 600mm wide strips or full linear meters off the 1220mm wide roll.


PRODUCT VERSIONS

Size

AVAILABILITY:5 in stock available for immediate shipping


PRICE
€24.15ex. VAT
(€65.98 /SQM)
5 in stock available for immediate shipping
QTY
ROLLS
ROLLS
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

If you want to add the carbon fibre look to your car, motorbike or even iPhone or laptop without the cost of genuine carbon fibre parts or the mess of carbon fibre skinning then this stunning carbon fibre effect vinyl could be just the answer.

Made by world renowned manufacturer 3M (who's adhesive films we use on our own range of flexible carbon fibre sheets), 3M Di-Noc carbon fibre vinyl is sophisticated self adhesive vinyl material embossed with a 2/2 twill carbon fibre pattern that accurately mimics the way that light interacts with carbon fibre to give a unique and convincing 3D effect.

Alternative Products

No matter how sophisticated this carbon fibre vinyl is, it can still be distinguished from a genuine carbon fibre part. If you want a 100% convincing carbon fibre finish for any part then take a look at our best selling range of Carbon Fibre Skinning Starter Kits.

We also sell a range of genuine carbon fibre flexible sheets. The sheets are manufactured by encapsulating genuine carbon fibre between two layers of polymer; as such they have genuinely 3D carbon fibre appearance. Unlike the carbon fibre vinyl the sheets cannot be easily stretched around complicated shapes and are more suited for use as scratch protectors, sill guards, tank pads etc.

Application

The film can be applied to flat surfaces without any manipulation (just peel off the backing and stick it down) but it can also be applied to just about any surface, including complicated curved shapes such as vehicle wing mirrors or body panels, motorcycle fairings or even iPods, iPhones or laptops.

When working on larger surfaces the film should be smoothed down using a squeegee applicator to remove wrinkles and when working on contoured (curved) surfaces the use of a hair dryer or heat gun is needed to soften the vinyl and allow it to follow the shape of the part being wrapped.

Although applying 3M carbon fibre vinyl wrap quickly and right first time does require some skill and practice, beginners can still get the same results by simply taking their time. At Carbon Mods we're familiar with handling real carbon fibre and certainly not used to vinyl and we were still able to get the result shown in the photograph (the wing mirror) first time, after a bit of adjustment and encouragement from the heat gun!

Temporary or semi-permanent 3M Dinoc installation should be done by applying the firm directly to the clean parts. For permanent installation it is recommended to use a primer spray like 3M Primer 94.

If you want to add the carbon fibre look to your car, motorbike or even iPhone or laptop without the cost of genuine carbon fibre parts or the mess of carbon fibre skinning then this stunning carbon fibre effect vinyl could be just the answer.

Made by world renowned manufacturer 3M (who's adhesive films we use on our own range of flexible carbon fibre sheets), 3M Di-Noc carbon fibre vinyl is sophisticated self adhesive vinyl material embossed with a 2/2 twill carbon fibre pattern that accurately mimics the way that light interacts with carbon fibre to give a unique and convincing 3D effect.

Alternative Products

No matter how sophisticated this carbon fibre vinyl is, it can still be distinguished from a genuine carbon fibre part. If you want a 100% convincing carbon fibre finish for any part then take a look at our best selling range of Carbon Fibre Skinning Starter Kits.

We also sell a range of genuine carbon fibre flexible sheets. The sheets are manufactured by encapsulating genuine carbon fibre between two layers of polymer; as such they have genuinely 3D carbon fibre appearance. Unlike the carbon fibre vinyl the sheets cannot be easily stretched around complicated shapes and are more suited for use as scratch protectors, sill guards, tank pads etc.

Application

The film can be applied to flat surfaces without any manipulation (just peel off the backing and stick it down) but it can also be applied to just about any surface, including complicated curved shapes such as vehicle wing mirrors or body panels, motorcycle fairings or even iPods, iPhones or laptops.

When working on larger surfaces the film should be smoothed down using a squeegee applicator to remove wrinkles and when working on contoured (curved) surfaces the use of a hair dryer or heat gun is needed to soften the vinyl and allow it to follow the shape of the part being wrapped.

Although applying 3M carbon fibre vinyl wrap quickly and right first time does require some skill and practice, beginners can still get the same results by simply taking their time. At Carbon Mods we're familiar with handling real carbon fibre and certainly not used to vinyl and we were still able to get the result shown in the photograph (the wing mirror) first time, after a bit of adjustment and encouragement from the heat gun!

Temporary or semi-permanent 3M Dinoc installation should be done by applying the firm directly to the clean parts. For permanent installation it is recommended to use a primer spray like 3M Primer 94.

Specification

Weight and Dimensions
Length300mm
Thickness0.2mm
Product Data
ColourBlack
TypeSingle Sided
ConstructionVinyl Film
Appearance2x2 Twill (Matt)
Fabric Specification
Fibre Orientation0, 90
Mechanical Properties
Tg Onset (DMA)65°C
General Properties
Gross Weight0.5248kg
Can’t find the answer you’re looking for?Ask our technical team a question.

The sheet has a nominal thickness of 200 microns.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for DI-NOC Black Carbon Fibre Vinyl (1200mm)

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payment processing by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo Ideal logo Carte Bancaire logo Giropay logo Bancontact logo PayPal logo Bank transfer logo

Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.