Downloads (1)

Technical DataSheet (TDS)339 KB

Specification

Weight and Dimensions
Length1000mm
Width3mm
Thickness1mm
Weight per metre4.5g
Product Data
ColourBlack
Resin MatrixEpoxy
ConstructionPultrusion
AppearanceUD (Matt)
Fabric Specification
Fibre OrientationUnidirectional
Mechanical Properties
Tensile Strength (Lengthways)400 - 500MPa
Tensile Modulus (lengthways)28-40GPa
Tg Onset (DMA)80°C
General Properties
Gross Weight0.0038kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

3 x 1mm Carbon Fibre Strip

Pultruded, rectangular section carbon fibre strip measuring 3mm x 1mm suitable for a range of uses including radio controlled models, UAVs, robotics and even musical instruments, as well as creative uses in art and fashion. The strip is manufactured to tight tolerances using high strength carbon fibre for maximum performance.

Available in 1m and 2m lengths.


PRODUCT VERSIONS

Length

AVAILABILITY:More than 100 availablefor immediate shipping


PRICE
€3.00ex. VAT
(€3.00 /M)
More than 100 availablefor immediate shipping
QTY
LENGTHS
LENGTHS

Trade discounts

0-45-1920+
€3.00€2.65€2.15
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Due to its incredible strength and light weight, carbon fibre strip (flat bar) is used in a wide range of applications including small and medium scale radio controlled planes, helicopters, boats and cars, UAVs, robotics and engineering.

Our carbon fibre strip is manufactured to engineering tolerances from pultruded unidirectional carbon fibres which means that all the strength of the strips runs laterally along their length.

Typical Uses

Pultruded carbon fibre strips are suitable for use in:

  • Radio-Controlled (RC) Planes/Helicopters
  • Unmanned Air Vehicles (UAVs)
  • Stunt/Power Kites
  • Robots
  • Mechanical Control Mechanisms

How to Buy

The carbon fibre strip on this page is 3mm wide and 1mm thick and is sold in 1m (1000mm) lengths. At Easy Composites we carry carbon fibre strips in thicknesses from 0.5mm to 2mm and widths of 3mm up to 12mm.

Our 3mm carbon fibre strips are available in a 1m or 2m length. Please choose the length you require from the drop-down list.

Discounts are available for larger quantities and wholesale/trade purchases; please contact us for details.

Trade discounts

0-45-1920+
€3.00€2.65€2.15
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

PRODUCT VIDEOS(1)

Due to its incredible strength and light weight, carbon fibre strip (flat bar) is used in a wide range of applications including small and medium scale radio controlled planes, helicopters, boats and cars, UAVs, robotics and engineering.

Our carbon fibre strip is manufactured to engineering tolerances from pultruded unidirectional carbon fibres which means that all the strength of the strips runs laterally along their length.

Typical Uses

Pultruded carbon fibre strips are suitable for use in:

  • Radio-Controlled (RC) Planes/Helicopters
  • Unmanned Air Vehicles (UAVs)
  • Stunt/Power Kites
  • Robots
  • Mechanical Control Mechanisms

How to Buy

The carbon fibre strip on this page is 3mm wide and 1mm thick and is sold in 1m (1000mm) lengths. At Easy Composites we carry carbon fibre strips in thicknesses from 0.5mm to 2mm and widths of 3mm up to 12mm.

Our 3mm carbon fibre strips are available in a 1m or 2m length. Please choose the length you require from the drop-down list.

Discounts are available for larger quantities and wholesale/trade purchases; please contact us for details.

Downloads (1)

Technical DataSheet (TDS)339 KB

Specification

Weight and Dimensions
Length1000mm
Width3mm
Thickness1mm
Weight per metre4.5g
Product Data
ColourBlack
Resin MatrixEpoxy
ConstructionPultrusion
AppearanceUD (Matt)
Fabric Specification
Fibre OrientationUnidirectional
Mechanical Properties
Tensile Strength (Lengthways)400 - 500MPa
Tensile Modulus (lengthways)28-40GPa
Tg Onset (DMA)80°C
General Properties
Gross Weight0.0038kg
Can’t find the answer you’re looking for?Ask our technical team a question.

Many people prefer the natural finish of these carbon products, however if you wish to paint them for your specific application then you can do so. A light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.

Generally, the pultrusions are used ‘as-is’ and don’t require painting. If you really do need/want to paint the pultrusions then a light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.

No these pultrusions are not magnetic.

No, this pultrusion is manufactured from standard modulus fibres.

We do not currently offer a custom cutting service for our tubes and pultrusions. However, they are able to be cut DIY relatively easily as you can see from our tutorial video: How to Cut Carbon Fibre Sheet, Tube and Parts

Unfortunately it is not possible to cut a usable thread into carbon fibre composites. The nature of the material is such that the teeth on a thread would not be able to take any load and would break up either during thread turning or the first attempt at using the thread.

Where it is desirable to have a threaded method of attaching the tube or rod, it is commonplace to fabricate and then bond an aluminium insert into the tube or over the rod end which can then have a thread cut into it.

In simple terms these carbon rods would work with linear bearings in that fashion. The only concern is long term durability as the carbon surface is not quite as hard as aluminium and thus would likely wear quicker in many circumstances. For low usage or low load situations this may well not be a limiting factor.

The HDT of these pultrusions is 80 °C.

Yes absolutely! If done carefully, a hacksaw can be used to cut a pultrusion. Take a look at this VIDEO where we show various methods of cutting carbon fibre.

Yes, the 1mm x 3mm strip is so thin that it is pretty flexible, you can bend it round a reasonably tight radius (in its flat orientation).

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for 3 x 1mm Carbon Fibre Strip

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payment processing by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo Ideal logo Carte Bancaire logo Giropay logo Bancontact logo PayPal logo Bank transfer logo

Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2022. All rights reserved.