Need any help or advice?+44 (0)1782 454499
Fibre Specifics | Twaron® 2200 | |
---|---|---|
Weave | 2 x 2 Twill |
Thickness | 0.4 | mm |
---|---|---|
Width | 14 | mm |
Consolidated Thickness | 0.4 | mm |
Areal Weight | 300 | g/m² |
Colour | Yellow | |
---|---|---|
Format | Flat Braid | |
Fibre Type | Aramid / Kevlar Fibre | |
UV Resistance | Poor | |
Brand | Teijin |
Compatible With | Epoxy | Yes |
---|---|---|
Compatible With | Polyester | Yes |
Compatible With | Vinylester | Yes |
Gross Weight | 0.005 | kg |
---|
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
High quality aramid flat braid in a 14mm width. This 300gsm narrow woven aramid braid is often used as seam-tape on kayaks but can be used in a variety of applications where a high strength or abrasion resistant composite reinforcement is required.
This braid is sold by the linear metre.
AVAILABILITY:More than 100 availablefor immediate shipping
Trade discounts
0-4 | 5-19 | 20-249 | 250+ |
---|---|---|---|
€2.50 | €2.25 | €1.75 | €1.25 |
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
The 14mm aramid tape is a flat braid made from high quality Twaron 2200 1210 aramid fibre (a direct equivalent to Kevlar fibre) in such a way that the braid is 'flat', i.e. it is not a tube/sleeve but instead resembles a densely woven tape. The fibre orientation of the tape is +/- 45 degrees which means that the braid is ideally suited to handling torsional loads, affords excellent conformity (drape) without buckling the fibres and resists crack propagation.
Aramid flat braid is used as a very high strength tape for joining composite panels or protecting joins in composite panels, most commonly around the seam of kayaks, canoes and other small boats.
Aramid flat braid is compatible with all conventional resin systems including polyester, vinylester and epoxy resin. Most commonly, the braid is applied to the outside seam of canoes and kayaks so completely overlap the join between the upper and lower hull mouldings. The braid is then simply wet-out with epoxy resin and then once cured, over-painted once more with another coat of epoxy resin to create an extremely tough, durable and protective join.
Typical Uses
Aramid flat braid can be put to excellent use in a wide range of composite and none-composite applications including:
How to Buy
This 14mm flat aramid braid is sold by the linear metre (with the braid at its natural 45° orientation) in a continuous length. For example; if you purchase a quantity of '5' you will receive a continuous length of braid 5m long. There is no minimum order quantity but several volume discounts are available for larger quantities.
Further Information
The lightweight flat braid on this page has a nominal width of 14mm although, in common with all braids, elongating or shortening the braid will change its width.
We stock aramid flat braid in three different specifications as follows:
Product | Weight | Stretched Width | Width at 45° | Stretched Weight |
---|---|---|---|---|
Lightweight 300g 14mm | 300g/m² | 10mm | 14mm | 3.9g/m |
Lightweight 300g 32mm | 300g/m² | 25mm | 32mm | 8.56g/m |
Heavyweight 400g 45mm | 400g/m² | 35mm | 45mm | 13g/m |
Trade discounts
0-4 | 5-19 | 20-249 | 250+ |
---|---|---|---|
€2.50 | €2.25 | €1.75 | €1.25 |
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
The 14mm aramid tape is a flat braid made from high quality Twaron 2200 1210 aramid fibre (a direct equivalent to Kevlar fibre) in such a way that the braid is 'flat', i.e. it is not a tube/sleeve but instead resembles a densely woven tape. The fibre orientation of the tape is +/- 45 degrees which means that the braid is ideally suited to handling torsional loads, affords excellent conformity (drape) without buckling the fibres and resists crack propagation.
Aramid flat braid is used as a very high strength tape for joining composite panels or protecting joins in composite panels, most commonly around the seam of kayaks, canoes and other small boats.
Aramid flat braid is compatible with all conventional resin systems including polyester, vinylester and epoxy resin. Most commonly, the braid is applied to the outside seam of canoes and kayaks so completely overlap the join between the upper and lower hull mouldings. The braid is then simply wet-out with epoxy resin and then once cured, over-painted once more with another coat of epoxy resin to create an extremely tough, durable and protective join.
Typical Uses
Aramid flat braid can be put to excellent use in a wide range of composite and none-composite applications including:
How to Buy
This 14mm flat aramid braid is sold by the linear metre (with the braid at its natural 45° orientation) in a continuous length. For example; if you purchase a quantity of '5' you will receive a continuous length of braid 5m long. There is no minimum order quantity but several volume discounts are available for larger quantities.
Further Information
The lightweight flat braid on this page has a nominal width of 14mm although, in common with all braids, elongating or shortening the braid will change its width.
We stock aramid flat braid in three different specifications as follows:
Product | Weight | Stretched Width | Width at 45° | Stretched Weight |
---|---|---|---|---|
Lightweight 300g 14mm | 300g/m² | 10mm | 14mm | 3.9g/m |
Lightweight 300g 32mm | 300g/m² | 25mm | 32mm | 8.56g/m |
Heavyweight 400g 45mm | 400g/m² | 35mm | 45mm | 13g/m |
Fibre Specifics | Twaron® 2200 | |
---|---|---|
Weave | 2 x 2 Twill |
Thickness | 0.4 | mm |
---|---|---|
Width | 14 | mm |
Consolidated Thickness | 0.4 | mm |
Areal Weight | 300 | g/m² |
Colour | Yellow | |
---|---|---|
Format | Flat Braid | |
Fibre Type | Aramid / Kevlar Fibre | |
UV Resistance | Poor | |
Brand | Teijin |
Compatible With | Epoxy | Yes |
---|---|---|
Compatible With | Polyester | Yes |
Compatible With | Vinylester | Yes |
Gross Weight | 0.005 | kg |
---|
For wet-lay lamination you will use a bit more resin than the weight of the fabric. A typical fibre resin ratio for Aramid based fabrics is 45/55. For example, with a 300gsm cloth, for 1 square metre you will have 300g of fabric and thus will need 367g of resin to wet it out, plus a small amount of wastage for the brush and mixing pot.
You can purchase a sample of our fabrics here.
No. Our Kevlar Fabric is only available in the classic Kevlar yellow.
We do not currently stock any hybrid pre-pregs either as carbon-aramid mix or pure aramid
Aramid and Diolen laminates can be drilled into using a HSS drill bit designed for drilling steel. Start with a pilot hole and work up the diameter until the desired hole size is achieved. Any aramid/diolen fluff can be cut off with a sharp Stanley blade or scalpel.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.