Need any help or advice?+44 (0)1782 454499

CUSTOMER GALLERY

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

MATERIALS & CONSUMABLES
210g 2x2 Twill 3k Carbon Fibre Cloth (1250mm) Thumbnail
CF-22-210-125210g 2x2 Twill 3k Carbon Fibre Cloth (1250mm)€34.50 /linear metre

XCR Epoxy Coating Resin 1Kg Kit Thumbnail
EP-XCR-1XCR Epoxy Coating Resin 1Kg Kit€31.95 /kit

XCR Black Epoxy Basecoat 500g Kit Thumbnail
EP-XBC-05XCR Black Epoxy Basecoat 500g Kit€19.20 /kit

Total €0.00

CUSTOMER GALLERY

Skatedeck Carbon Fibre Skinning Project

Pavel used the carbon fibre skinning process to give his Skate Deck this amazing carbon fibre finish and add strength.

The skeleton board was prepared before Pavel applied the XCR Black Epoxy Basecoat and allowed this to cure to the tacky B-stage - before moving on to the next step which was to carefully lay the carbon fibre fabric over the base board and leave it to cure.

Next Pavel applied the first coat of XCR Coating Resin to seal the fibres of the fabric and once cured he trimmed the sides to remove excess fabric and keyed and cleaned the surface ready for the next coat.

The final stage of the project was to apply layers of coating resin to build up to the high gloss finish you see in the photographs. Pavel finished the piece by removing any resin drips with wet and dry abrasive paper and polishing up to a high shine with NW1 polishing compound.


ABOUT PAVEL GARMAS

Pavel is a Youtuber and maker who creates YouTube videos and tutorials for his projects.

For Pavel's tutorial on this project follow the link.


CONTACT INFORMATION

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

MATERIALS & CONSUMABLES
210g 2x2 Twill 3k Carbon Fibre Cloth (1250mm) Thumbnail
CF-22-210-125210g 2x2 Twill 3k Carbon Fibre Cloth (1250mm)€34.50 /linear metre

XCR Epoxy Coating Resin 1Kg Kit Thumbnail
EP-XCR-1XCR Epoxy Coating Resin 1Kg Kit€31.95 /kit

XCR Black Epoxy Basecoat 500g Kit Thumbnail
EP-XBC-05XCR Black Epoxy Basecoat 500g Kit€19.20 /kit

Total €0.00

ABOUT PAVEL GARMAS

Pavel is a Youtuber and maker who creates YouTube videos and tutorials for his projects.

For Pavel's tutorial on this project follow the link.


CONTACT INFORMATION
YouTubewww.youtube.com/pavelgarmasskatedeck

100% SECURE

    Secured by Digicert Payment processing by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo Ideal logo Carte Bancaire logo Giropay logo Bancontact logo PayPal logo Bank transfer logo

Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.

YouTubewww.youtube.com/pavelgarmasskatedeck