Need any help or advice?+44 (0)1782 454499
This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.
Safety Datasheet (SDS) | 924 KB | |
Dutch Safety DataSheet | 951 KB | |
Technical Datasheet (TDS) | 266 KB |
Gross Weight | 0.512 | kg |
---|
This product is classed as dangerous goods for transport.
It can be shipped to all mainland EU countries, Ireland, Balearic Islands, Corsica, Sicily and Sardinia.
Unfortunately, for the time being we are unable to ship dangerous goods to Cyprus, Malta, the Canary Islands, Ceuta, Melilla, Jan Mayan and Svalbard.
For a full information regarding the shipment of dangerous goods, see our delivery information page.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Highly effective solvent cleaner for the cleaning and preparation of moulds prior to application of new release agent. Use to remove old release agents (including chemical release agents and wax), dirt, grease and other contaminants from a mould's surface, without damaging the mould, prior to coating with Easy-Lease or similar release agents.
Available to buy online in 500ml and 1l tins.
AVAILABILITY:More than 10 availablefor immediate shipping
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
MC1 Mould Cleaner is a blend of solvents that is designed to dissolve and clean mould surface contamination such as wax, dirt, oil and grease. It will remove any previously applied release system and prepare the mould surface for any release agent application. The solvents used are designed to be none-aggressive to all commonly used mould materials.
MC1 Mould Cleaner forms part of Easy Composites' Universal Chemical Release Agent system. Use in conjunction with CR1 Easy-Lease Chemical Release Agent for a totally reliable mould release system compatible with almost all resin systems and mould materials.
How to Buy
MC1 Mould Cleaner is available in a smaller 500ml pack and a larger 1l pack. Please choose the pack size you require from the drop-down list above.
Further Information
Application Guide
If moulds are heavily soiled remove any excess dirt/dust/grease prior to application by wiping or washing with standard detergent and drying thoroughly.
Using a clean cotton cloth apply the cleaner by wiping firmly over the mould surface.
Using a second clean and dry cloth remove the cleaner from the mould before it has evaporated, by doing this the contaminates will be absorbed while they are suspended in the cleaner.
Repeat this process as necessary, using clean cloths at each stage, a minimum of 2 applications is recommended, heavily waxed or soiled moulds would require many more.
Note: Large mould surfaces may need to be done in stages to avoid evaporation, depending upon working temperature and mould complexity around 0.5sqm should be considered the maximum area per application.
MC1 Mould Cleaner is a blend of solvents that is designed to dissolve and clean mould surface contamination such as wax, dirt, oil and grease. It will remove any previously applied release system and prepare the mould surface for any release agent application. The solvents used are designed to be none-aggressive to all commonly used mould materials.
MC1 Mould Cleaner forms part of Easy Composites' Universal Chemical Release Agent system. Use in conjunction with CR1 Easy-Lease Chemical Release Agent for a totally reliable mould release system compatible with almost all resin systems and mould materials.
How to Buy
MC1 Mould Cleaner is available in a smaller 500ml pack and a larger 1l pack. Please choose the pack size you require from the drop-down list above.
Further Information
Application Guide
If moulds are heavily soiled remove any excess dirt/dust/grease prior to application by wiping or washing with standard detergent and drying thoroughly.
Using a clean cotton cloth apply the cleaner by wiping firmly over the mould surface.
Using a second clean and dry cloth remove the cleaner from the mould before it has evaporated, by doing this the contaminates will be absorbed while they are suspended in the cleaner.
Repeat this process as necessary, using clean cloths at each stage, a minimum of 2 applications is recommended, heavily waxed or soiled moulds would require many more.
Note: Large mould surfaces may need to be done in stages to avoid evaporation, depending upon working temperature and mould complexity around 0.5sqm should be considered the maximum area per application.
Gross Weight | 0.512 | kg |
---|
Yes, Mould Cleaner will strip off all release agents during the process of cleaning the mould. This means it is essential to re-apply your preferred release agent prior to using the mould again.
If the resin is cured, the mould cleaner is unlikely to remove it on its own. If the release agent went down properly, often the resin can be flicked off with the edge of a demoulding wedge or similar, which, being soft plastic, is less likely to scratch the mould.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product is classed as dangerous goods for transport.
It can be shipped to all mainland EU countries, Ireland, Balearic Islands, Corsica, Sicily and Sardinia.
Unfortunately, for the time being we are unable to ship dangerous goods to Cyprus, Malta, the Canary Islands, Ceuta, Melilla, Jan Mayan and Svalbard.
For a full information regarding the shipment of dangerous goods, see our delivery information page.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.