Need any help or advice?+44 (0)1782 454499
This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.
Dutch Safety DataSheet | 716 KB | |
Safety Datasheet (SDS) | 919 KB | |
Technical DataSheet (TDS) | 296 KB |
Gloss Units | 89 | |
---|---|---|
VOC Value | 673 | g/l |
Coverage | 0.625 | m2 |
Flash-off Time | 10 | mins |
Touch Dry | 60 | mins |
Full Cure @ 20°C | 24 | hr |
Working Time (Activated) | 48 | hr |
Shelf Life (Unactivated) | 36 | months |
Gross Weight | 0.7 | kg |
---|---|---|
Brand | FANTOM CLEAR™ |
This product is classed as dangerous goods for transport.
It can be shipped to all mainland EU countries, Ireland, Balearic Islands, Corsica, Sicily and Sardinia.
Unfortunately, for the time being we are unable to ship dangerous goods to Cyprus, Malta, the Canary Islands, Ceuta, Melilla, Jan Mayan and Svalbard.
For a full information regarding the shipment of dangerous goods, see our delivery information page.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Professional quality genuine two-part (2k) clearcoat for carbon fibre parts resulting in a highly polishable yet scratch-resistant coating with excellent resistance to chemicals and fuel that provides UV protection to the underlying carbon fibre.
For new carbon fibre parts with pinholes or microporosity, FANTOM CLEAR CX’s high solids content and low surface tension can fill pinholes and achieve a smooth finish in 3-4 coats.
Available in 400ml cans in GLOSS, SATIN and MATT finish.
AVAILABILITY:More than 50 availablefor immediate shipping
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
FANTOM CLEAR™ CX is a professional quality, genuine two-part (2k) paint system optimised for the clearcoating of cosmetic carbon fibre parts. The resulting coating is highly polishable yet scratch resistant, with excellent resistance to chemicals and fuel, making it suitable for use in proximity to fuel fillers, engine bay and exhaust systems.
FANTOM CLEAR™ CX’s high solids content and low surface tension means it reacts less to small pinholes and microporosity common in carbon fibre parts, helping the paint to overcome such surface defects and achieve a smooth finish in typically 3-4 coats.
Importantly, when applied to carbon fibre parts, FANTOM CLEAR™ CX provides important UV and chemical protection to the underlying carbon fibre, significantly reducing the risk of yellowing or fading. Additionally, FANTOM CLEAR CX can be used to restore cracked, faded or discoloured carbon fibre parts (see TDS for correct preparation procedure).
GLOSS, SATIN, or MATT
FANTOM CLEAR CX™ is available GLOSS, SATIN and MATT versions, each providing a completely different look to your carbon fibre parts.
GLOSS
SATIN & MATT
How to Use
Whilst FANTOM CLEAR CX™ has been developed to overcome small pinholes and microporisity, best results (in the least coats) will be achieved on parts with a good surface finish. Clearly visible pinholes or voids should be filled with a clear epoxy resin or pinhole filler before painting.
Main Coat
Optional Finishing Coat
As a genuine 2k paint in a case, once activated, the can must be used entirely within around 48hrs.
Further Information
Watch the accompanying instruction video for the GLOSS or SATIN & MATT versions easy-to-follow application instructions.
For detailed application instructions and further technical information, see the FANTOM CLEAR CX GLOSS or FANTOM CLEAR CX SATIN & MATT technical datasheets.
FANTOM CLEAR™ CX is a professional quality, genuine two-part (2k) paint system optimised for the clearcoating of cosmetic carbon fibre parts. The resulting coating is highly polishable yet scratch resistant, with excellent resistance to chemicals and fuel, making it suitable for use in proximity to fuel fillers, engine bay and exhaust systems.
FANTOM CLEAR™ CX’s high solids content and low surface tension means it reacts less to small pinholes and microporosity common in carbon fibre parts, helping the paint to overcome such surface defects and achieve a smooth finish in typically 3-4 coats.
Importantly, when applied to carbon fibre parts, FANTOM CLEAR™ CX provides important UV and chemical protection to the underlying carbon fibre, significantly reducing the risk of yellowing or fading. Additionally, FANTOM CLEAR CX can be used to restore cracked, faded or discoloured carbon fibre parts (see TDS for correct preparation procedure).
GLOSS, SATIN, or MATT
FANTOM CLEAR CX™ is available GLOSS, SATIN and MATT versions, each providing a completely different look to your carbon fibre parts.
GLOSS
SATIN & MATT
How to Use
Whilst FANTOM CLEAR CX™ has been developed to overcome small pinholes and microporisity, best results (in the least coats) will be achieved on parts with a good surface finish. Clearly visible pinholes or voids should be filled with a clear epoxy resin or pinhole filler before painting.
Main Coat
Optional Finishing Coat
As a genuine 2k paint in a case, once activated, the can must be used entirely within around 48hrs.
Further Information
Watch the accompanying instruction video for the GLOSS or SATIN & MATT versions easy-to-follow application instructions.
For detailed application instructions and further technical information, see the FANTOM CLEAR CX GLOSS or FANTOM CLEAR CX SATIN & MATT technical datasheets.
Gloss Units | 89 | |
---|---|---|
VOC Value | 673 | g/l |
Coverage | 0.625 | m2 |
Flash-off Time | 10 | mins |
Touch Dry | 60 | mins |
Full Cure @ 20°C | 24 | hr |
Working Time (Activated) | 48 | hr |
Shelf Life (Unactivated) | 36 | months |
Gross Weight | 0.7 | kg |
---|---|---|
Brand | FANTOM CLEAR™ |
Yes, as long as the paint is fully cured, and then given a key and clean for surface prep, it should then get a good bond.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product is classed as dangerous goods for transport.
It can be shipped to all mainland EU countries, Ireland, Balearic Islands, Corsica, Sicily and Sardinia.
Unfortunately, for the time being we are unable to ship dangerous goods to Cyprus, Malta, the Canary Islands, Ceuta, Melilla, Jan Mayan and Svalbard.
For a full information regarding the shipment of dangerous goods, see our delivery information page.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.