Need any help or advice?+44 (0)1782 454499
Technical Datasheet (TDS) | 206 KB |
Colour | White | |
---|---|---|
Type | Flow Media | |
Format | Mesh | |
Chemistry / Material | Polypropylene |
Max Service Temp | 60 | °C |
---|
Width | 1050 | mm |
---|
Gross Weight | 0.511 | kg |
---|
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
FM100 is an economical, extruded polypropylene mesh used as a 'flow media' to assist the flow of resin into a laminate during the resin infusion process. Recommended for flatter or less complex mould shapes.
1.05m wide. Available to buy online in a 5lm folded pack, by the linear metre or in full 100lm rolls.
AVAILABILITY:More than 10 availablefor immediate shipping
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Economical, extruded polypropylene mesh used as a 'flow media' to assist the flow of resin across and throughout the laminate during the resin infusion process. The bi-planar extrusion ensures that a resin flow path is maintained even under full vacuum.
Typical Uses:
As an extruded mesh, FM100 offers a degree of conformability but is better suited to flatter, less complex mould shapes. For more complex mould shapes we would recommend our FM105 Knitted Infusion Mesh.
FM100 can be stacked in multiple layers to provided faster flow rates in selected areas or for layer scale infusions.
Like most other elements of the vacuum bagging or resin infusion 'stack' infusion mesh cannot be reused once resin has flowed through it and therefore should be considered a disposable consumable of the process.
How To Buy
This mesh is available to buy in a folded 5lm pack, by the linear metre (10lm minimum order) or in wholesale 100lm rolls. Please choose how you would like to purchase from the drop-down list above.
The mesh itself is 1.05m wide meaning that each linear metre is equal to 1.05sqm.
We believe we offer unbeatable prices on vacuum bagging consumables. To make comparisons easy, select the different pack/roll sizes from the drop down menu above
Further Information
FM100 Infusion Mesh would most commonly be used for vacuum resin infusion of less complex shaped small to medium sized mouldings including vehicle panels and small boat hulls.
For this type of resin infusion, peel ply would be positioned directly onto the laminate, followed by the FM100 Infusion Mesh, followed by the other infusion consumables (connectors, infusion spiral) and then enclosed within the vacuum bag.
Economical, extruded polypropylene mesh used as a 'flow media' to assist the flow of resin across and throughout the laminate during the resin infusion process. The bi-planar extrusion ensures that a resin flow path is maintained even under full vacuum.
Typical Uses:
As an extruded mesh, FM100 offers a degree of conformability but is better suited to flatter, less complex mould shapes. For more complex mould shapes we would recommend our FM105 Knitted Infusion Mesh.
FM100 can be stacked in multiple layers to provided faster flow rates in selected areas or for layer scale infusions.
Like most other elements of the vacuum bagging or resin infusion 'stack' infusion mesh cannot be reused once resin has flowed through it and therefore should be considered a disposable consumable of the process.
How To Buy
This mesh is available to buy in a folded 5lm pack, by the linear metre (10lm minimum order) or in wholesale 100lm rolls. Please choose how you would like to purchase from the drop-down list above.
The mesh itself is 1.05m wide meaning that each linear metre is equal to 1.05sqm.
We believe we offer unbeatable prices on vacuum bagging consumables. To make comparisons easy, select the different pack/roll sizes from the drop down menu above
Further Information
FM100 Infusion Mesh would most commonly be used for vacuum resin infusion of less complex shaped small to medium sized mouldings including vehicle panels and small boat hulls.
For this type of resin infusion, peel ply would be positioned directly onto the laminate, followed by the FM100 Infusion Mesh, followed by the other infusion consumables (connectors, infusion spiral) and then enclosed within the vacuum bag.
Technical Datasheet (TDS) | 206 KB |
Colour | White | |
---|---|---|
Type | Flow Media | |
Format | Mesh | |
Chemistry / Material | Polypropylene |
Max Service Temp | 60 | °C |
---|
Width | 1050 | mm |
---|
Gross Weight | 0.511 | kg |
---|
The resin usage for this infusion mesh is 700gsm
The plastic grid repeats at approximately 3.5mm so the gap between the plastic mesh lines is around 3mm.
No, once used the mesh becomes encapsulated heavily in resin and cannot be reused.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.