Need any help or advice?+44 (0)1782 454499
Gross Weight | 0.23 | kg |
---|
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Available to buy separately as a replacement part, this is the complete lid assembly for our CP1 Resin Infusion Catch-Pot. Includes resin hose gland, barb and glycerine filled gauge.
AVAILABILITY:More than 10 availablefor immediate shipping
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Available to buy separately as a replacement part, this is the complete lid assembly for our Professional Catch-Pot.
The lid assembly includes the laser cut clear perspex lid, high quality glycerine-filled vacuum gauge, hose-tail barb connection and entry gland (for 6mm ID PVC tube).
Fitting/Thread Information
The lid is connected to the vacuum pump via the 8mm brass hose-tail barb connector using 8mm ID Silicone Hose.
The vacuum bag or resin infusion project is connected to the catch-pot by through the black plastic gland nut. The gland nut is also designed to accept a 9mm OD hose, such as our 6mm ID Clear PVC Hose.
To ensure a permanent, reliable and airtight seal the lid of our catch-pot comes with the vacuum gauge, gland connector and hose-tail barb (push) fitting already screwed and bonded into place. Although not designed to be removed, the vacuum gauge and 8mm hose-tail barb both screw into the lid using a 1/4 BSP thread.
We also sell the Glycerine Filled Vacuum Gauge, 6mm ID (9mm OD) Clear PVC Hose and 8mm Hose-Tail Barb separately.
Available to buy separately as a replacement part, this is the complete lid assembly for our Professional Catch-Pot.
The lid assembly includes the laser cut clear perspex lid, high quality glycerine-filled vacuum gauge, hose-tail barb connection and entry gland (for 6mm ID PVC tube).
Fitting/Thread Information
The lid is connected to the vacuum pump via the 8mm brass hose-tail barb connector using 8mm ID Silicone Hose.
The vacuum bag or resin infusion project is connected to the catch-pot by through the black plastic gland nut. The gland nut is also designed to accept a 9mm OD hose, such as our 6mm ID Clear PVC Hose.
To ensure a permanent, reliable and airtight seal the lid of our catch-pot comes with the vacuum gauge, gland connector and hose-tail barb (push) fitting already screwed and bonded into place. Although not designed to be removed, the vacuum gauge and 8mm hose-tail barb both screw into the lid using a 1/4 BSP thread.
We also sell the Glycerine Filled Vacuum Gauge, 6mm ID (9mm OD) Clear PVC Hose and 8mm Hose-Tail Barb separately.
Gross Weight | 0.23 | kg |
---|
It doesn't I'm afraid however, if you have one of the old Carbon Mods catch-pots and you need a new lid, please get in touch with us and I'm sure we can offer you a discount off the new 'Professional' Easy Composites one.
The Entry Gland uses a M16 x 1.5 thread on the attachment side. The domed nut side uses a non-standard bespoke thread.
The lid is 10mm thick and the diameter is 112mm
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.