Downloads (1)

Technical DataSheet (TDS)45 KB

Specification

Product Data
ColourWhite
TypeRelease Film
FormatFlat Film
Chemistry / MaterialPET
Weight and Dimensions
Film Thickness125μm
Width914mm
Areal Weight173g/m²
Mechanical Properties
Max Service Temp150°C
Tensile Strength180MPa
Tensile Modulus3600MPa
Elongation at Break150%
General Properties
Gross Weight0.158kg
BrandDupont

Mylar Release Film 125 Micron (914mm)

Mylar is a glossy, almost transparent polyester film which releases perfectly from cured resins, leaving a smooth, glossy appearance on cured laminates, such as wing skins. This substantial 125-micron (0.25mm) thickness is strong and robust and helps to smooth the surface of the laminate.

The film is 914mm wide and sold by the linear metre. Volume discounts apply and a full 100m roll is available.


PRODUCT VERSIONS

Units of Sale

AVAILABILITY:More than 100 availablefor immediate shipping


PRICE
€6.00ex. VAT
More than 100 availablefor immediate shipping
QTY
LINEAR METRES
LINEAR METRES

Trade discounts

0-45-1920+
€6.00€4.75€3.75
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Mylar Type-A polyester film in 125-micron thickness is a tough, glossy, semi-transparent film/sheet which can be used as a totally non-stick surface for a wide range of resins, including polyester, epoxy, vinylester and polyurethane.

At 125-micron the film is 0.25mm thick; much thicker than a traditional release film. This gives the film/sheet a durable toughness and also prevents it from stretching, allowing the film to be pulled tight over laminates like wing skins whilst maintaining its flatness and smoothing out the surface of the cured laminate.

When used as a release film, Mylar is suitable for use up to 150°C, making it suitable for use in elevated temperature cures, including prepreg applications, up to this temperature.

Typical Uses

In composites, Mylar film is most often used to provide smooth, glossy finish to wet-lay/hand laminates by applying the film directly to the wet laminate, and then easily removing once cured. One such application is when laminating reinforcement skins onto foam wing sections, for RC planes, motorsport and UAV wings.

Mylar film can also be applied over repairs to leave them with a smooth, flat finish. Mylar can also be laid over materials like wood or MDF to create non-stick surface and enclosures for resin casting and mould making and general laminating.

As well as composites applications, Mylar film at this weight is the material of choice for craft stencils and can be easily and precisely cut by craft knife or CNC plotter/cutter.

  • Laminating wing skins over foam
  • Leaving a smooth, glossy finish on wet-laid laminates or repairs
  • Making surfaces or enclosures that resin won’t stick to
  • Craft applications, especially decorative stencils

How to Buy

Our Mylar release film is 914mm (91.4cm / 36") wide and sold by the linear metre. When a purchasing a quantity of more than one metre, the film will be supplied cut to length on one continuous roll. Enter the quantity of metres you require at the top of the page.

To protect the film and avoid creases, it is always supplied rolled around a core, never folded.

Trade discounts

0-45-1920+
€6.00€4.75€3.75
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

PRODUCT VIDEOS(1)

Mylar Type-A polyester film in 125-micron thickness is a tough, glossy, semi-transparent film/sheet which can be used as a totally non-stick surface for a wide range of resins, including polyester, epoxy, vinylester and polyurethane.

At 125-micron the film is 0.25mm thick; much thicker than a traditional release film. This gives the film/sheet a durable toughness and also prevents it from stretching, allowing the film to be pulled tight over laminates like wing skins whilst maintaining its flatness and smoothing out the surface of the cured laminate.

When used as a release film, Mylar is suitable for use up to 150°C, making it suitable for use in elevated temperature cures, including prepreg applications, up to this temperature.

Typical Uses

In composites, Mylar film is most often used to provide smooth, glossy finish to wet-lay/hand laminates by applying the film directly to the wet laminate, and then easily removing once cured. One such application is when laminating reinforcement skins onto foam wing sections, for RC planes, motorsport and UAV wings.

Mylar film can also be applied over repairs to leave them with a smooth, flat finish. Mylar can also be laid over materials like wood or MDF to create non-stick surface and enclosures for resin casting and mould making and general laminating.

As well as composites applications, Mylar film at this weight is the material of choice for craft stencils and can be easily and precisely cut by craft knife or CNC plotter/cutter.

  • Laminating wing skins over foam
  • Leaving a smooth, glossy finish on wet-laid laminates or repairs
  • Making surfaces or enclosures that resin won’t stick to
  • Craft applications, especially decorative stencils

How to Buy

Our Mylar release film is 914mm (91.4cm / 36") wide and sold by the linear metre. When a purchasing a quantity of more than one metre, the film will be supplied cut to length on one continuous roll. Enter the quantity of metres you require at the top of the page.

To protect the film and avoid creases, it is always supplied rolled around a core, never folded.

Downloads (1)

Technical DataSheet (TDS)45 KB

Specification

Product Data
ColourWhite
TypeRelease Film
FormatFlat Film
Chemistry / MaterialPET
Weight and Dimensions
Film Thickness125μm
Width914mm
Areal Weight173g/m²
Mechanical Properties
Max Service Temp150°C
Tensile Strength180MPa
Tensile Modulus3600MPa
Elongation at Break150%
General Properties
Gross Weight0.158kg
BrandDupont

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for Mylar Release Film 125 Micron (914mm)

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

100% SECURE

    Secured by Digicert Payment processing by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo Ideal logo Carte Bancaire logo Giropay logo Bancontact logo PayPal logo Bank transfer logo

Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2022. All rights reserved.