EC20 Industrial Vacuum Pump

Developed in conjunction with leading Italian pump manufacturer DVP, EC20 is high capacity vacuum pump designed specifically for the industrial composites market. EC20 offers the fast pull-down, continuous operation, high vacuum level, and reliability demanded in a production environment.

The 99.8% (2 mbar) vacuum level makes EC20 suitable for use in composites processes that require the highest vacuum level, such as out-of-autoclave prepregs and resin infusion. The large 20m³/hr capacity makes EC20 suitable for use with large vacuum bagging operations or as the powerplant for a centralised vacuum system, whilst its optimised vacuum curve delivers the fastest possible pull-down for rapid degassing of resins and silicones.

The pump’s relatively quiet operation, continuous duty cycle, check-valve and virtually mist free operation make it suitable for most environments, including manufacturing facilities, workshops, laboratories, schools and universities.

EC20 represents the very best in light industrial vacuum pumps and will deliver years of reliable service and superior performance even in the busiest workshop, university or laboratory.

Aanbevolen gebruik

• Vacuum degassing (fast pull down)
• Centralised vacuum systems (vacuum ring main)
• Large-scale vacuum bagging/resin infusion
• Resin transfer moulding (RTM/RTM light)
• Prepreg/autoclave use
• Large scale vacuum pressing/veneer pressing

Please note: EC20 is NOT suitable for use degassing materials with a high moisture content (such as plaster) or for vacuum drying.

Key Features

• Highest levels of vacuum (99.8% / 2 mbar)
• Large 20m³/hr + capacity
• Superior vacuum curve performance
• High leak tolerance
• Zero* oil mist/vapour
• Engineered for constant operation
• Industrial quality components provide maximum reliability (full spares available)
• 2-year warranty (excludes user damage)

Verdere informatie

Continuous Operation

Thanks to its continuous gas ballast and internal oil-mist separator, EC20 is capable of running for prolonged periods, or continuously, against high levels of leakage (up to 400 mbar) without emitting any oil/mist/smoke or running out of oil. 

Size Capability

EC20 has a free air displacement of 20m³/hr (12 CFM) making it suitable for large scale (10m²+) vacuum bagging or resin infusion projects.

For vacuum degassing operations, EC20’s optimised vacuum curve means its draw-down time can be up to 3 times faster than conventional oil-bath type pumps of the same stated free air displacement.

Zero* Oil Mist/Vapour

EC20’s internal oil-mist separation and recovery system results in near zero emissions of oil/mist/smoke, making it suitable for use in sensitive environments such as confined workshops, schools, universities and laboratories, even when operated against a leaking condition (up to 400 mbar). *Conventionally noticeable/detectable.

Vacuum Pump Oil

EC20 is an oil lubricated vacuum pump and requires the correct type of oil to run. Oil should be checked and replaced regularly, according to the operating instructions. To avoid leakage during transport, the pump is shipped empty of oil but is supplied with a bottle of oil sufficient to fill the pump.

Replacement oil must be BV32 / ISO VG 32 / SW40, such as our VPO32 vacuum pump oil, sold separately.

International Use - 220-240V ONLY

EC20 is suitable for use in all countries and territories with a 220-240V mains supply. The pump is available with a choice of the most popular international mains plug types. Please choose the plug type you require from the drop-down menu at the top of the page. This pump cannot be operated on a 110V mains supply such as in the USA or Japan.

Vacuum Degassing

EC20 is recommended for rapid pull-down of large chambers for vacuum degassing; the fast pull-down being essential when working with highly reactive resins and silicones where achieving full vacuum inside the chamber quickly is critical.

EC20's throughput of 330l/m means that it can pull a typical 26 litre degassing chamber down to almost total vacuum extremely quickly. For further details on pull-down times, see below:

Accessories

EC20 in standard form is supplied complete and simply needs to be mounted in place and filled with the supplied oil before it can be used. The following optional accessories are available to assist with installation and operation in different settings.

• Base plate with rubber feet - Stabilises the pump allowing it to be used free-standing
• Exhaust Silencer - Reduces exhaust noise and protects outlet from debris
• 1/2" BSP to 1/4" BSP Reducer - Allows for direct connection of 1/4" BSP fittings from 1/2" BSP
• Additional VPO32 vacuum pump oil

Choosing the Correct Vacuum Pump

If you’re unsure if this is the correct vacuum pump for your application, see our guide to choosing the correct vacuum pump, ask a question below or speak to our technical team for expert advice.