Heb je hulp of advies nodig?
+44 31 54566 456666
Downloads (1)
 | Technisch gegevensblad (TDS) |  92 KB |
Specificatie
Productgegevens
| Max. onderhoudstemperatuur | 180 | °C |
|---|---|---|
| Draadmaat | 1/4" | BSPT (R) |
Algemene eigenschappen
| Brutogewicht | 0.083 | kg |
|---|
TBC2 Aansluiting door de zak
- VBTBC2
- Geen beoordelingen
TBC2 is a high quality through-bag connector (breach unit) used to make a secure, reliable connection between a vacuum bag and the vacuum pump/supply. TBC2 is completely reusable and built-to-last. It is suitable for all methods of vacuum bagging, including prepregs and is suitable for high temperature and autoclave use.
TBC2 has a male 1/4" BSPP (G) thread.
BESCHIKBAARHEID:Meer dan 50 beschikbaarvoor onmiddellijke verzending
Handelskortingen
| 4 | 49 | 50+ |
|---|---|---|
| €19.90 | €17.45 | €13.85 |
We zijn niet te verslaan op prijs!
Als je denkt dat je elders een gelijkwaardig product goedkoper kunt kopen, neem dan contact met ons op om je wensen te bespreken.
These high quality Through Bag Connectors are a quick and reliable way to connect vacuum hoses to vacuum bags.
The vacuum bag connector is made up of two halves, one of which is placed inside the vacuum bag, the other is placed on the outside. A small hole is made in the vacuum bag and the mandrel of the connector passes through this hole. The two halves twist together clamping around a rubber seal, providing a solid and reliable air-tight seal or vacuum bagging port.
These high quality connectors can be re-used indefinitely.
Verdere informatie
Hose Connection
The Through-Bag connector is supplied with a 1/4BSP thread. The simplest way to connect the Through-Bag connector to your vacuum hose would be by purchasing a female-to-female 1/4 BSP 1/4 turn valve and then either a 6mm or 8mm hosetail barb.
Alternatively the Through-Bag connector can be used with the VC200 Quick Release Vacuum Coupling. The diagram below shows a typical configuration with the VC200 Quick Release Vacuum Coupling connected to the Through Bag Connector and an 8mm ID Silicone Vacuum Hose (using an 8mm ID Hose-Tail Barb)
Handelskortingen
| 4 | 49 | 50+ |
|---|---|---|
| €19.90 | €17.45 | €13.85 |
We zijn niet te verslaan op prijs!
Als je denkt dat je elders een gelijkwaardig product goedkoper kunt kopen, neem dan contact met ons op om je wensen te bespreken.
These high quality Through Bag Connectors are a quick and reliable way to connect vacuum hoses to vacuum bags.
The vacuum bag connector is made up of two halves, one of which is placed inside the vacuum bag, the other is placed on the outside. A small hole is made in the vacuum bag and the mandrel of the connector passes through this hole. The two halves twist together clamping around a rubber seal, providing a solid and reliable air-tight seal or vacuum bagging port.
These high quality connectors can be re-used indefinitely.
Verdere informatie
Hose Connection
The Through-Bag connector is supplied with a 1/4BSP thread. The simplest way to connect the Through-Bag connector to your vacuum hose would be by purchasing a female-to-female 1/4 BSP 1/4 turn valve and then either a 6mm or 8mm hosetail barb.
Alternatively the Through-Bag connector can be used with the VC200 Quick Release Vacuum Coupling. The diagram below shows a typical configuration with the VC200 Quick Release Vacuum Coupling connected to the Through Bag Connector and an 8mm ID Silicone Vacuum Hose (using an 8mm ID Hose-Tail Barb)
Downloads (1)
| Technisch gegevensblad (TDS) | 92 KB |
Specificatie
Productgegevens
| Max. onderhoudstemperatuur | 180 | °C |
|---|---|---|
| Draadmaat | 1/4" | BSPT (R) |
Algemene eigenschappen
| Brutogewicht | 0.083 | kg |
|---|
Yes it can although you will need to make some kind of adaptor to match. An easier option can be to cut the valve out of a vacuum storage bag as it is designed for hoover use, then use the gum tape to bond it into the bag you are making - assuming you can't use the whole vacuum storage bag as is!
The Thread size between the two halves is a M14x2 metric thread.
The maximum service temperature is 180°C which is the limit of the silicone seal itself.
You would want to cut a 12.5mm hole into the silicone mat to allow sufficient clearance for the threaded section to pass through cleanly.
STEL JE EIGEN VRAAG
Customer Product Reviews for TBC2 Through-Bag Connector
STUUR UW EIGEN PRODUCTBEOORDELING IN
We publiceren alle beoordelingen voor geverifieerde aankopen. Stuur je eigen beoordeling in en help andere klanten met hun keuze.STUUR UW EIGEN PRODUCTBEOORDELING IN
We publiceren alle beoordelingen voor geverifieerde aankopen. Stuur je eigen beoordeling in en help andere klanten met hun keuze.AANVERWANTE PRODUCTEN
KLANTEN KOCHTEN OOK
AANVERWANTE PRODUCTEN
KLANTEN KOCHTEN OOK
100% BEVEILIGD
BETALINGSMETHODEN
Easy Composites EU B.V., geregistreerd in Nederland 73601195. Alle inhoud auteursrechtelijk beschermd (C) Easy Composites Ltd, 2025. Alle rechten voorbehouden.