Downloads (2)

Safety DataSheet (SDS)648 KB
Technical DataSheet (TDS)344 KB

Specification

Pot Life and Cure Times
Working Time150mins
Handling Strength240mins
Working Strength8Hours
Full Cure Time7Days
Product Data
Shelf Life12Months
Hot Strength140°C
Maximum Gap Fill2mm
Mix Ratio2:1
Glass Transition Temperature113°C
ColourGrey
Chemistry / MaterialEpoxy
Mechanical Properties
Shear Strength (Aluminium)20 - 25N/mm²
Shear Strength (Carbon Fibre)25 - 30N/mm²
Cured Mechanical Properties
Shear Strength (Stainless Steel)20 - 25N/mm²
Suitable Uses
Suitable UsesCompositesYes
Suitable UsesMetalsYes
Suitable UsesThermoset PlasticsYes
Suitable UsesWoodYes
Suitable UsesCeramicsYes
General Properties
Gross Weight0.073kg
BrandPermabond

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

ET5441 High Temperature Epoxy Adhesive 50ml

High performance, thermally conductive two-part epoxy adhesive formulated specifically for applications requiring high temperature resistance. ET5441 is recommended for use at temperatures up to 140°C, where 50% of cold strength is still retained.

2:1 mix ratio. Grey in colour, 2hrs working time, 8hr handling strength, full cure in 7days.

Available to buy in 50ml cartridges (2:1 dispenser gun required). Includes one mixer nozzle.


AVAILABILITY:22 in stock available for immediate shipping


Optional items

PRODUCT OPTIONS

PRICE
€23.40ex. VAT
22 in stock available for immediate shipping
QTY
EACH
EACH

Trade discounts

0-910+
€23.40€20.40
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

ET5441 from Permabond is a high performance, thermally conductive, two-part structural epoxy adhesive developed specifically for bonding of metals and composite materials in high temperature applications. It is ideal for service temperatures up to 140°C, where it retains 50% of its cold strength, but can be used at higher temperatures up to 200°C where it still retains >30% of its cold strength.

ET5441 is mid-grey in colour. The adhesive is relatively thixotropic, allowing it to accommodate gap-filling up to 2mm and application on vertical surfaces.

Along with its outstanding temperature resistance, ET5441 also has excellent resistance to motor oil, glycol and hot and cold water.

Main Characteristics

Working timeHandling StrengthWorking StrengthFull CureHot StrengthMix RatioGap Fill
150mins4hrs8hrs7 days140°C2:12mm

Pack Size and Dispensing

ET5441 is supplied in a 2:1 ratio 50ml twin cartridge and requires our standard 50ml Adhesive Dispenser Gun, which is suitable for 1:1 and 2:1 50ml adhesive cartridges.

The cartridge is intended to be used with static mixer nozzles, which fully mix the two components as they pass through the nozzle. Each cartridge is supplied with one nozzle but once used, adhesive cures in the nozzle and it needs to be discarded. Additional Type 2 Static Mixer Nozzles can be purchased separately.

Trade discounts

0-910+
€23.40€20.40
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

ET5441 from Permabond is a high performance, thermally conductive, two-part structural epoxy adhesive developed specifically for bonding of metals and composite materials in high temperature applications. It is ideal for service temperatures up to 140°C, where it retains 50% of its cold strength, but can be used at higher temperatures up to 200°C where it still retains >30% of its cold strength.

ET5441 is mid-grey in colour. The adhesive is relatively thixotropic, allowing it to accommodate gap-filling up to 2mm and application on vertical surfaces.

Along with its outstanding temperature resistance, ET5441 also has excellent resistance to motor oil, glycol and hot and cold water.

Main Characteristics

Working timeHandling StrengthWorking StrengthFull CureHot StrengthMix RatioGap Fill
150mins4hrs8hrs7 days140°C2:12mm

Pack Size and Dispensing

ET5441 is supplied in a 2:1 ratio 50ml twin cartridge and requires our standard 50ml Adhesive Dispenser Gun, which is suitable for 1:1 and 2:1 50ml adhesive cartridges.

The cartridge is intended to be used with static mixer nozzles, which fully mix the two components as they pass through the nozzle. Each cartridge is supplied with one nozzle but once used, adhesive cures in the nozzle and it needs to be discarded. Additional Type 2 Static Mixer Nozzles can be purchased separately.

Downloads (2)

Safety DataSheet (SDS)648 KB
Technical DataSheet (TDS)344 KB

Specification

Pot Life and Cure Times
Working Time150mins
Handling Strength240mins
Working Strength8Hours
Full Cure Time7Days
Product Data
Shelf Life12Months
Hot Strength140°C
Maximum Gap Fill2mm
Mix Ratio2:1
Glass Transition Temperature113°C
ColourGrey
Chemistry / MaterialEpoxy
Mechanical Properties
Shear Strength (Aluminium)20 - 25N/mm²
Shear Strength (Carbon Fibre)25 - 30N/mm²
Cured Mechanical Properties
Shear Strength (Stainless Steel)20 - 25N/mm²
Suitable Uses
Suitable UsesCompositesYes
Suitable UsesMetalsYes
Suitable UsesThermoset PlasticsYes
Suitable UsesWoodYes
Suitable UsesCeramicsYes
General Properties
Gross Weight0.073kg
BrandPermabond
Can’t find the answer you’re looking for?Ask our technical team a question.

There is no practical minimum bond thickness for this adhesive although you do need to ensure that *some* adhesive is present, which is why glass spheres are sometimes used to prevent the adhesive from being scraped off completely. Essentially though, as long as an even thin film is applied the bond strength between the two materials will be good.

Yes, certainly. In fact the easiest way to do this is to simply leave the static mixer nozzle in place after you use the adhesive. The adhesive that's in the nozzle will have been mixed and so will cure but the glue at the start of the nozzle will be unmixed and not cured meaning the nozzle will twist off perfectly and the glue inside will have been protected from the atmosphere and so will be perfectly preserved ready for use.

A typical application of the adhesive is approximately a 0.5mm thick layer. At this thickness, one 50ml cartridge would cover an area 30cm by 30cm; a 400ml cartridge would cover an area approximately 90cm by 90cm.

For best results when gluing over a large surface area, use a spreader to help ensure the adhesive is laid down in an even layer.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for ET5441 High Temperature Epoxy Adhesive 50ml

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payment processing by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo Ideal logo Carte Bancaire logo Giropay logo Bancontact logo PayPal logo Bank transfer logo

Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.