Need any help or advice?+44 (0)1782 454499
Safety Datasheet (SDS) | 332 KB | |
Dutch Safety DataSheet | 335 KB | |
Technical DataSheet (TDS) | 309 KB |
Working Time | 0.5 Depends on substrate - see TDS | mins |
---|---|---|
Full Cure Time (UV cure) | 5 | sec |
Colour | Clear | |
---|---|---|
Chemistry / Material | Ethyl Cyanoacrylate | |
Shelf Life | 12 | Months |
Shear Strength (Aluminium) | 5 - 9 | N/mm² |
---|---|---|
Shear Strength (Stainless Steel) | 14 - 19 | N/mm² |
Suitable Uses | Composites | Yes |
---|---|---|
Suitable Uses | Metals | Yes |
Suitable Uses | Thermoset Plastics | Yes |
Suitable Uses | Wood | Yes |
Suitable Uses | Ceramics | Yes |
Gross Weight | 0.03 | kg |
---|---|---|
Brand | Permabond |
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
This remarkable UV-curing cyanoacrylate (superglue) adhesive can be used to make high strength bonds between a wide range of substrates in seconds using a UV torch.
The completely clear adhesive can also be used to instantly make spot repairs or fill pinholes on composite laminates, especially prior to clearcoat or paint.
Sold in 20g tubes. Note: 130UV should be stored refrigerated at 2-7 °C.
AVAILABILITY:More than 50 availablefor immediate shipping
Trade discounts
0-4 | 5-19 | 20+ |
---|---|---|
€44.90 | €39.90 | €37.20 |
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
130UV from Permabond® is a remarkable low viscosity clear UV curing cyanoacrylate adhesive (superglue) that can be used to make instant, high strength structural bonds between a wide range of substrates including most plastics, composites, rubber and metals.
130UV’s ‘dual cure’ technology means that whilst the adhesive will cure within a few seconds when exposed to concentrated UV light (such as from a UV torch) it will also cure fully without UV exposure, albeit more slowly, by means of a conventional moisture cure reaction. This is especially useful when bonding opaque substrates where UV exposure will achieve instant cure of the exposed adhesive, whilst conventional moisture cure will fully cure thin sections of adhesive in shadow areas.
Without concentrated UV exposure from a UV torch, 130UV offers plenty of working time, allowing complex assemblies to prepared and aligned before snap curing when ready using a UV torch.
When exposed to UV light, Permabond® 130UV cures clear and tack-free with no bloom (whitening effect) in a matter of seconds. Where slightly thicker fillets are used, UV light will penetrate and fully cure the adhesive where a conventional moisture-cure cyanoacrylate may not fully cure.
Instant Pinhole Filler / Spot Repair
One particularly useful application for UV130 is its use as an instant pinhole filler or spot repair system for composites, particularly filling pinholes on cosmetic carbon fibre composites. UV130’s completely clear appearance, bloom-free surface and ability to cure in seconds, even in thicker sections, mean that small pinholes and defects on a component’s surface can be filled, cured, flatted and finished in a matter of minutes.
130UV is highly recommended for filling small pinholes and voids prior to clearcoating carbon fibre parts with FANTOM CLEAR™ carbon fibre clearcoat.
Additional Information
For full safety and technical information users must download and consult the product’s safety and technical datasheets from the downloads section on this page.
Directions for Use
Storage
Although UV130 cures fastest when exposed to concentrated UV light from a torch, it will still cure in the UV light from natural light so take extra care to clean the nozzle thoroughly with an IPA wipe and replace the lid immediately when not in use.
130UV should be stored refrigerated at 2-7°C. When stored at this temperature, the shelf-life is 12 months.
Suitable UV Torches
Whilst 395nm frequency is recommended, most UV torches are suitable for curing Permabond® 130UV. The speed of the cure will depend on the power of the UV torch, its spectral output, distance from the bond line and the transmission characteristics of the substrates (i.e. their opacity).
Easy Composites offer a low cost, battery operated 395nm UV torch suitable for localised UV curing of 130UV adhesive in just a few seconds.
How to Buy
Permabond® 130UV is sold in 20g tubes. Volume discounts automatically apply.
Trade discounts
0-4 | 5-19 | 20+ |
---|---|---|
€44.90 | €39.90 | €37.20 |
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
130UV from Permabond® is a remarkable low viscosity clear UV curing cyanoacrylate adhesive (superglue) that can be used to make instant, high strength structural bonds between a wide range of substrates including most plastics, composites, rubber and metals.
130UV’s ‘dual cure’ technology means that whilst the adhesive will cure within a few seconds when exposed to concentrated UV light (such as from a UV torch) it will also cure fully without UV exposure, albeit more slowly, by means of a conventional moisture cure reaction. This is especially useful when bonding opaque substrates where UV exposure will achieve instant cure of the exposed adhesive, whilst conventional moisture cure will fully cure thin sections of adhesive in shadow areas.
Without concentrated UV exposure from a UV torch, 130UV offers plenty of working time, allowing complex assemblies to prepared and aligned before snap curing when ready using a UV torch.
When exposed to UV light, Permabond® 130UV cures clear and tack-free with no bloom (whitening effect) in a matter of seconds. Where slightly thicker fillets are used, UV light will penetrate and fully cure the adhesive where a conventional moisture-cure cyanoacrylate may not fully cure.
Instant Pinhole Filler / Spot Repair
One particularly useful application for UV130 is its use as an instant pinhole filler or spot repair system for composites, particularly filling pinholes on cosmetic carbon fibre composites. UV130’s completely clear appearance, bloom-free surface and ability to cure in seconds, even in thicker sections, mean that small pinholes and defects on a component’s surface can be filled, cured, flatted and finished in a matter of minutes.
130UV is highly recommended for filling small pinholes and voids prior to clearcoating carbon fibre parts with FANTOM CLEAR™ carbon fibre clearcoat.
Additional Information
For full safety and technical information users must download and consult the product’s safety and technical datasheets from the downloads section on this page.
Directions for Use
Storage
Although UV130 cures fastest when exposed to concentrated UV light from a torch, it will still cure in the UV light from natural light so take extra care to clean the nozzle thoroughly with an IPA wipe and replace the lid immediately when not in use.
130UV should be stored refrigerated at 2-7°C. When stored at this temperature, the shelf-life is 12 months.
Suitable UV Torches
Whilst 395nm frequency is recommended, most UV torches are suitable for curing Permabond® 130UV. The speed of the cure will depend on the power of the UV torch, its spectral output, distance from the bond line and the transmission characteristics of the substrates (i.e. their opacity).
Easy Composites offer a low cost, battery operated 395nm UV torch suitable for localised UV curing of 130UV adhesive in just a few seconds.
How to Buy
Permabond® 130UV is sold in 20g tubes. Volume discounts automatically apply.
Working Time | 0.5 Depends on substrate - see TDS | mins |
---|---|---|
Full Cure Time (UV cure) | 5 | sec |
Colour | Clear | |
---|---|---|
Chemistry / Material | Ethyl Cyanoacrylate | |
Shelf Life | 12 | Months |
Shear Strength (Aluminium) | 5 - 9 | N/mm² |
---|---|---|
Shear Strength (Stainless Steel) | 14 - 19 | N/mm² |
Suitable Uses | Composites | Yes |
---|---|---|
Suitable Uses | Metals | Yes |
Suitable Uses | Thermoset Plastics | Yes |
Suitable Uses | Wood | Yes |
Suitable Uses | Ceramics | Yes |
Gross Weight | 0.03 | kg |
---|---|---|
Brand | Permabond |
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.