R120 P3 Perforated Release Film (1500mm)

AeroFilm® R120-P3 is a general purpose composite release film P3 perforated suitable for use at temperatures up to 120°C.

R120-P3 is our recommended release film when vacuum bagging hand-layup laminates. The film offers excellent release from a wide range of resin systems including epoxy, polyester and vinylester. Its P3 perforations provide the ideal restriction to resin flow between the wet laminate and the breather/soaker layer, allowing surplus resin to be drawn out of the laminate without excessive bleed-off of the resin.

Typisch gebruik

Commonly used for and recommended for:

• Vacuum bagging wet layup laminates
• Debulking prepregs

R120-P3 is equally suited to debulking prepreg laminates where it will prevent the breather layer from sticking to the uncured prepreg and then easily release from the laminate after debulking.

Kopen

This release film is available to buy in a folded 5lm pack, by the linear metre (10lm minimum order) or in wholesale rolls of 250lm (375sqm). Please choose how you would like to purchase from the drop-down list above.

The film itself is 1.50m wide in a single sheet meaning that each linear metre is equal to 1.5sqm.

Volumeprijzen

We believe we offer unbeatable prices on vacuum bagging consumables. To make comparisons easy, select the different pack/roll sizes from the drop down menu above::

Verdere informatie

Most commonly used when vacuum bagging a wet layup laminate, peel ply would be placed against the wet laminate, followed by the R120-P3 Perforated Release Film, followed by a breather/soaker layer (so absorb excess resin squeezed from the laminate), enclosed within vacuum bagging film.

Vacuum Bagged Wet-Lay
• [ -- Wet Laminate -- ]
• R120-P3 Perforated Release Film
• Ademlaagdoek
• Vacuümzakfolie