Need any help or advice?+44 (0)1782 454499

CUSTOMER GALLERY

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

MATERIALS & CONSUMABLES
GCX Clear Polyester Spray Gel 5kg Thumbnail
GCX-5GCX Clear Polyester Spray Gel 5kg€57.10 /pack

210g 3x1 Twill 3k Carbon Kevlar Cloth (1200mm) Thumbnail
CK-31-210-120210g 3x1 Twill 3k Carbon Kevlar Cloth (1200mm)€27.70 /linear metre

Total €0.00
MATERIALS FEATURED
GPX Premium Polyester Laminating Resin 5kg Thumbnail
GPX-5GPX Premium Polyester Laminating Resin 5kg€37.00 /pack

Total €0.00

CUSTOMER GALLERY

RC Racing Boats

Elson boats is renowned for producing high quality high speed composite RC boat hulls. With years of experience, the boats are produced to a number of specialised designs including a variety of materials to get the desired performance.

The process starts with making a pattern by hand for the desired hull design. This consists of templating the shape using a combination of wooden ribs and thin plywood sheeting formed over the ribs to give the complex shapes and curves. The pattern is finished off to give a smooth and high gloss finish ready to take a mould from.

The mould material of choice is our Uni-Mould Mould Making system due to its high quality and ease of use. Most of the hulls are at least 2 part moulds often with additional moulds for the deck and removable sections.

The parts themselves are made using a combination of Carbon Fibre and Carbon Kevlar hybrid cloths to get a good level of impact resistance as well as overall strength. Most of the boats are made using our GCX Polyester Gel coat pigmented to a desired colour, followed up with the fabrics laminated using our GPX polyester laminating resin. This gives a good combination of performance, looks and cost.

The finished parts are then trimmed and assembled prior to fitting out the boats with RC equipment, motive power etc as per customer specifications. Elson Racing Boats are used by a variety of people and sold to customers all over the world.


ABOUT ELSON BOATS

Elson boats is renowned for producing high quality high speed composite RC boat hulls. With years of experience, the boats are produced to a number of specialised designs including a variety of materials to get the desired performance.


USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

MATERIALS & CONSUMABLES
GCX Clear Polyester Spray Gel 5kg Thumbnail
GCX-5GCX Clear Polyester Spray Gel 5kg€57.10 /pack

210g 3x1 Twill 3k Carbon Kevlar Cloth (1200mm) Thumbnail
CK-31-210-120210g 3x1 Twill 3k Carbon Kevlar Cloth (1200mm)€27.70 /linear metre

Total €0.00
MATERIALS FEATURED
GPX Premium Polyester Laminating Resin 5kg Thumbnail
GPX-5GPX Premium Polyester Laminating Resin 5kg€37.00 /pack

Total €0.00

ABOUT ELSON BOATS

Elson boats is renowned for producing high quality high speed composite RC boat hulls. With years of experience, the boats are produced to a number of specialised designs including a variety of materials to get the desired performance.


100% SECURE

    Secured by Digicert Payment processing by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo Ideal logo Carte Bancaire logo Giropay logo Bancontact logo PayPal logo Bank transfer logo

Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.