Need any help or advice?+44 (0)1782 454499

CUSTOMER GALLERY

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

MATERIALS & CONSUMABLES
CR1 Easy-Lease Chemical Release Agent - 250ml Thumbnail
CR1-025CR1 Easy-Lease Chemical Release Agent - 250ml€12.00 /pack

MC1 Mould Cleaner 500ml Thumbnail
MC1-05MC1 Mould Cleaner 500ml€10.75 /pack

VM100 Black 10min Methyl Methacrylate Adhesive 50ml Twin Tube Thumbnail
VM100B-50VM100 Black 10min Methyl Methacrylate Adhesive 50ml Twin Tube€10.55 /each

Soft Filleting and Filling Wax 325g Thumbnail
FILLWAX-330Soft Filleting and Filling Wax 325g€7.15 /block

Total €0.00
VACUUM BAGGING CONSUMABLES
VB160 Vacuum Bagging Film LFT (1520mm) Linear Metres Thumbnail
AFVB160-152LFTVB160 Vacuum Bagging Film LFT (1520mm) Linear Metres€2.35 /linear metre

BR180 140g Breather Cloth (1520mm) Linear Metres Thumbnail
AFBR180-152BR180 140g Breather Cloth (1520mm) Linear Metres€2.10 /linear metre

R210 Unperforated Prepreg Release Film (1530mm) Linear Metres Thumbnail
AFR210-153R210 Unperforated Prepreg Release Film (1530mm) Linear Metres€5.45 /linear metre

ST150 Vacuum Bagging Sealant Tape 15m Each Thumbnail
VBST150ST150 Vacuum Bagging Sealant Tape 15m Each€6.65 /roll

Total €0.00
PATTERN MAKING MATERIALS
PCG Polyester Pattern-Coat Hi-Gloss 1kg Thumbnail
PCG-1PCG Polyester Pattern-Coat Hi-Gloss 1kg€31.20 /pack

PF90 High Density Polyurethane Foam T=100mm, 600 x 600mm Thumbnail
PUF90-06-06PF90 High Density Polyurethane Foam T=100mm, 600 x 600mm€56.70 /block

PCP Polyester Pattern-Coat Primer 1kg Thumbnail
PCP-1PCP Polyester Pattern-Coat Primer 1kg€31.05 /pack

Total €0.00
REINFORCEMENTS
XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 1m Roll Thumbnail
XC110-C331T2-210(1250)-1XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 1m Roll€84.15 /roll

Total €0.00

CUSTOMER GALLERY

Audi TT RS Carbon Intake System

Stefan needed to design and build a intake and custom air box system for an Audi TT RS. The car had been tuned to 1000bhp so needed a custom intake to suit.

The pattern was designed and cut from foam. The foam was finished with the Pattern Coat Primer and High Gloss to get a smooth finish, then it was used to create the mould.

The intake and air scoop parts were made using the XC110 pre-preg system before being finished off with bonded in bigHead inserts for fixings to fix it into the cars engine bay.


ABOUT STRAIGHT FORWARD RACING TECHNOLOGIES

Straight Forward Racing Technologies

Stefan first got into working with composites by wrapping some interior car parts in carbon fibre, He then discovered Easy Composites video tutorials and embarked on his first prepreg project.

The first project was a little air scoop for an Audi TTRS intake system. He followed this project up by making an entire air box system for the same car, then another inlet pipe and the last big project was a wing for the new Toyota Supra.

You can see more of Stefan's projects in the gallery.


CONTACT INFORMATION
Facebookwww.facebook.com/straightforward

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

MATERIALS & CONSUMABLES
CR1 Easy-Lease Chemical Release Agent - 250ml Thumbnail
CR1-025CR1 Easy-Lease Chemical Release Agent - 250ml€12.00 /pack

MC1 Mould Cleaner 500ml Thumbnail
MC1-05MC1 Mould Cleaner 500ml€10.75 /pack

VM100 Black 10min Methyl Methacrylate Adhesive 50ml Twin Tube Thumbnail
VM100B-50VM100 Black 10min Methyl Methacrylate Adhesive 50ml Twin Tube€10.55 /each

Soft Filleting and Filling Wax 325g Thumbnail
FILLWAX-330Soft Filleting and Filling Wax 325g€7.15 /block

Total €0.00
VACUUM BAGGING CONSUMABLES
VB160 Vacuum Bagging Film LFT (1520mm) Linear Metres Thumbnail
AFVB160-152LFTVB160 Vacuum Bagging Film LFT (1520mm) Linear Metres€2.35 /linear metre

BR180 140g Breather Cloth (1520mm) Linear Metres Thumbnail
AFBR180-152BR180 140g Breather Cloth (1520mm) Linear Metres€2.10 /linear metre

R210 Unperforated Prepreg Release Film (1530mm) Linear Metres Thumbnail
AFR210-153R210 Unperforated Prepreg Release Film (1530mm) Linear Metres€5.45 /linear metre

ST150 Vacuum Bagging Sealant Tape 15m Each Thumbnail
VBST150ST150 Vacuum Bagging Sealant Tape 15m Each€6.65 /roll

Total €0.00
PATTERN MAKING MATERIALS
PCG Polyester Pattern-Coat Hi-Gloss 1kg Thumbnail
PCG-1PCG Polyester Pattern-Coat Hi-Gloss 1kg€31.20 /pack

PF90 High Density Polyurethane Foam T=100mm, 600 x 600mm Thumbnail
PUF90-06-06PF90 High Density Polyurethane Foam T=100mm, 600 x 600mm€56.70 /block

PCP Polyester Pattern-Coat Primer 1kg Thumbnail
PCP-1PCP Polyester Pattern-Coat Primer 1kg€31.05 /pack

Total €0.00
REINFORCEMENTS
XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 1m Roll Thumbnail
XC110-C331T2-210(1250)-1XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 1m Roll€84.15 /roll

Total €0.00

ABOUT STRAIGHT FORWARD RACING TECHNOLOGIES

Straight Forward Racing Technologies

Stefan first got into working with composites by wrapping some interior car parts in carbon fibre, He then discovered Easy Composites video tutorials and embarked on his first prepreg project.

The first project was a little air scoop for an Audi TTRS intake system. He followed this project up by making an entire air box system for the same car, then another inlet pipe and the last big project was a wing for the new Toyota Supra.

You can see more of Stefan's projects in the gallery.


CONTACT INFORMATION
Instagram@straight_forwrd_rt
Facebookwww.facebook.com/straightforward

100% SECURE

    Secured by Digicert Payment processing by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo Ideal logo Carte Bancaire logo Giropay logo Bancontact logo PayPal logo Bank transfer logo

Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.

Instagram@straight_forwrd_rt