Need any help or advice?+44 (0)1782 454499

CUSTOMER GALLERY

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

TOOLS & EQUIPMENT
Plastic Demoulding Wedge Medium Thumbnail
PA-W-MPlastic Demoulding Wedge Medium€2.20 /each

VM100 Black 10min Methyl Methacrylate Adhesive 50ml Twin Tube Thumbnail
VM100B-50VM100 Black 10min Methyl Methacrylate Adhesive 50ml Twin Tube€9.85 /each

Perma-Grit Sanding Block Large Thumbnail
SB280Perma-Grit Sanding Block Large€28.75 /each

Total €0.00
COMPONENT MATERIALS
White Polyester Pigment 500g Thumbnail
PG-PY-WHITE-05White Polyester Pigment 500g€9.25 /pack

Total €0.00
PATTERN MAKING MATERIALS
PCG Polyester Pattern-Coat Hi-Gloss 5kg Thumbnail
PCG-5PCG Polyester Pattern-Coat Hi-Gloss 5kg€104.35 /pack

PF40 Low Density Polyurethane Foam T=100mm, 600 x 600mm Thumbnail
PUF40-06-06PF40 Low Density Polyurethane Foam T=100mm, 600 x 600mm€34.30 /block

EasyCell75 Closed Cell PVC Foam T=3mm, 1085 x 1020mm Thumbnail
PVC75-1-3EasyCell75 Closed Cell PVC Foam T=3mm, 1085 x 1020mm€16.15 /sheet

Mirka Wet and Dry Combination Pack 50 Sheets Thumbnail
WPFCOMB-50Mirka Wet and Dry Combination Pack 50 Sheets€27.60 /pack

PCP Polyester Pattern-Coat Primer 5kg Thumbnail
PCP-5PCP Polyester Pattern-Coat Primer 5kg€101.95 /pack

Total €0.00
MOULD MAKING MATERIALS
CR1 Easy-Lease Chemical Release Agent 500ml Thumbnail
CR1-05CR1 Easy-Lease Chemical Release Agent 500ml€19.20 /pack

Soft Filleting and Filling Wax 325g Thumbnail
FILLWAX-330Soft Filleting and Filling Wax 325g€7.15 /block

Polypropylene Sheet 1000 x 1000mm Thumbnail
PP-SHT-1Polypropylene Sheet 1000 x 1000mm€24.15 /sheet

Total €0.00

CUSTOMER GALLERY

Morris Minor Intake Scoop

Having never made anything like this before in composite materials, Malk watched our Easy Composites tutorials on pattern and mould making.

He found these very helpful and they gave him the knowledge to tackle his own project to make a new air intake scoop for his race retired Morris Minor.

The images show the process of the build that Malk went through, showing the design stage, through to completion. There is also a photograph of the car in action on the track with the original scoop.

Malk said that as he has no access to CAD design so did it 'old school' by drawing the pattern out on paper!


ABOUT MALK MOTLER - DIY'ER

Having retired his Morris Minor Pick-up from racing, Malk decided to put the car back on the road and wanted to make a new air intake scoop that was a more practical vision wise to use on the road.


USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

TOOLS & EQUIPMENT
Plastic Demoulding Wedge Medium Thumbnail
PA-W-MPlastic Demoulding Wedge Medium€2.20 /each

VM100 Black 10min Methyl Methacrylate Adhesive 50ml Twin Tube Thumbnail
VM100B-50VM100 Black 10min Methyl Methacrylate Adhesive 50ml Twin Tube€9.85 /each

Perma-Grit Sanding Block Large Thumbnail
SB280Perma-Grit Sanding Block Large€28.75 /each

Total €0.00
COMPONENT MATERIALS
White Polyester Pigment 500g Thumbnail
PG-PY-WHITE-05White Polyester Pigment 500g€9.25 /pack

Total €0.00
PATTERN MAKING MATERIALS
PCG Polyester Pattern-Coat Hi-Gloss 5kg Thumbnail
PCG-5PCG Polyester Pattern-Coat Hi-Gloss 5kg€104.35 /pack

PF40 Low Density Polyurethane Foam T=100mm, 600 x 600mm Thumbnail
PUF40-06-06PF40 Low Density Polyurethane Foam T=100mm, 600 x 600mm€34.30 /block

EasyCell75 Closed Cell PVC Foam T=3mm, 1085 x 1020mm Thumbnail
PVC75-1-3EasyCell75 Closed Cell PVC Foam T=3mm, 1085 x 1020mm€16.15 /sheet

Mirka Wet and Dry Combination Pack 50 Sheets Thumbnail
WPFCOMB-50Mirka Wet and Dry Combination Pack 50 Sheets€27.60 /pack

PCP Polyester Pattern-Coat Primer 5kg Thumbnail
PCP-5PCP Polyester Pattern-Coat Primer 5kg€101.95 /pack

Total €0.00
MOULD MAKING MATERIALS
CR1 Easy-Lease Chemical Release Agent 500ml Thumbnail
CR1-05CR1 Easy-Lease Chemical Release Agent 500ml€19.20 /pack

Soft Filleting and Filling Wax 325g Thumbnail
FILLWAX-330Soft Filleting and Filling Wax 325g€7.15 /block

Polypropylene Sheet 1000 x 1000mm Thumbnail
PP-SHT-1Polypropylene Sheet 1000 x 1000mm€24.15 /sheet

Total €0.00

ABOUT MALK MOTLER - DIY'ER

Having retired his Morris Minor Pick-up from racing, Malk decided to put the car back on the road and wanted to make a new air intake scoop that was a more practical vision wise to use on the road.


100% SECURE

    Secured by Digicert Payment processing by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo Ideal logo Carte Bancaire logo Giropay logo Bancontact logo PayPal logo Bank transfer logo

Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2022. All rights reserved.